欢迎访问ic37.com |
会员登录 免费注册
发布采购

AK4129 参数 Datasheet PDF下载

AK4129图片预览
型号: AK4129
PDF下载: 下载PDF文件 查看货源
内容描述: 6CH 216kHz的/ 24位异步SRC [6ch 216kHz / 24-Bit Asynchronous SRC]
分类和应用:
文件页数/大小: 50 页 / 718 K
品牌: AKM [ ASAHI KASEI MICROSYSTEMS ]
 浏览型号AK4129的Datasheet PDF文件第4页浏览型号AK4129的Datasheet PDF文件第5页浏览型号AK4129的Datasheet PDF文件第6页浏览型号AK4129的Datasheet PDF文件第7页浏览型号AK4129的Datasheet PDF文件第9页浏览型号AK4129的Datasheet PDF文件第10页浏览型号AK4129的Datasheet PDF文件第11页浏览型号AK4129的Datasheet PDF文件第12页  
[AK4129]  
No. Pin Name  
60 AVDD  
I/O  
-
Function  
Analog Power Supply Pin, 3.0 3.6V  
Digital Power Output Pin, Typ 1.8V  
When the PDN pin= “L”, the DV18 pin outputs “L”. Current must not be taken from  
this pin. A 1μF (±30%; including the temperature characteristics) capacitor should  
be connected between this pin and DVSS. When this capacitor is polarized, the  
positive polarity pin should be connected to the VD18 pin.  
Analog Ground Pin  
61 VD18  
O
62 VSS1  
63 TST3  
-
I
Test Pin.  
This pin should be connected to VSS2-5.  
Input Channel Clock #2 Pin  
When INAS pin = “L”, this pin should be connected to VSS2-5.  
64 ILRCK2  
I
Note: All input pins should not be left floating. DVDD1-4 must be connected to the same power supply.  
Note 1. SPB, CM2-0, INAS, PM2-1, OBIT1-0, TDM, ODIF1-0, IDIF2-0 and CAD0 pin must be changed when the PDN  
pin= “L”.  
Note 2. In parallel control mode (SPB pin = “L”), IDIF2-0 pins control all SRC1~3 audio interface input formats.  
In serial control mode (SPB pin = “H”), the setting of IDIF2-0 pins is ignored. The IDIF[12:10] bits setting is  
reflected to SRC1, the IDIF[22:20] bits setting is reflected to SRC2 and the IDIF[32:30] bits setting is reflected  
to SRC3.  
Note 3. In parallel control mode (SPB pin = “L”), the SMUTE pin controls all SRC1~3 soft mute.  
In serial control mode (SPB pin = “H”), the SUMUTE pin setting is ignored. The SMUTE1 bit setting is  
reflected to SRC1, the SMUTE2 bit setting is reflected to SRC2 and the SMUTE3 bit setting is reflected to  
SRC3.  
Note 4. In parallel control mode (SPB pin= “L”), DEM1-0 pins control all SRC1~3 de-emphasis settings.  
In serial control mode (SPB pin= “H”), setting of DEM1-0 pins is ignored. DEM[11:10] bits setting is reflected  
to SRC1, DEM[21:20] bits setting is reflected to SRC2 and DEM[31:30] bits setting is reflected to SRC3.  
Handling of Unused Pins  
The unused I/O pins should be processed appropriately as below.  
Classification Pin Name  
IBICK2, IMCLK, SDTI3, ILRCK3,  
Setting  
IBICK3, SMUTE, DITHER,  
OMCLK/XTI, ILRCK2, SDA, SCL,  
CAD0, TST0-6  
These pins must be connected to VSS2-5.  
Digital  
UNLOCK, SDTO1-3, MCKO, XTO,  
TST7  
These pins must be open.  
MS1173-E-01  
2010/09  
- 8 -