欢迎访问ic37.com |
会员登录 免费注册
发布采购

A8180K5R 参数 Datasheet PDF下载

A8180K5R图片预览
型号: A8180K5R
PDF下载: 下载PDF文件 查看货源
内容描述: [HIGH BRIGHTNESS LED DRIVER WITH INTERNAL SWITCH]
分类和应用: 驱动
文件页数/大小: 19 页 / 694 K
品牌: AITSEMI [ AiT Semiconductor ]
 浏览型号A8180K5R的Datasheet PDF文件第2页浏览型号A8180K5R的Datasheet PDF文件第3页浏览型号A8180K5R的Datasheet PDF文件第4页浏览型号A8180K5R的Datasheet PDF文件第5页浏览型号A8180K5R的Datasheet PDF文件第6页浏览型号A8180K5R的Datasheet PDF文件第7页浏览型号A8180K5R的Datasheet PDF文件第8页浏览型号A8180K5R的Datasheet PDF文件第9页  
A8180  
AiT Semiconductor Inc.  
www.ait-ic.com  
LED LIGHTING DRIVER  
HIGH BRIGHTNESS LED DRIVER WITH INTERNAL SWITCH  
DESCRIPTION  
FEATURES  
Simple low parts count  
Internal 32V NDMOS switch  
Up to 1.4A output current  
Single pin on/off and brightness control  
using DC voltage or PWM  
Soft Start  
High efficiency (up to 97%)  
Wide input voltage range: 6V to 32V  
Output shutdown  
Up to 1MHz switching frequency  
Inherent open-circuit LED protection  
Typical 4% output current accuracy  
High-side current sense  
Hysteretic control: no compensation  
Adjustable constant LED current  
Over temperature protection  
Available in SOT89-5 package  
The A8180 is a continuous mode inductive step-down  
converter, designed for driving single or multiple series  
connected LEDs efficiently from a voltage source higher  
than the LED voltage. The device operates from an input  
supply between 6V and 32V and provides an externally  
output current up to 1.4A. Depending upon supply  
voltage and external components, this can provides up  
to 24 watts of output power.  
The A8180 includes the output switch and a high-side  
output current sensing circuit, which uses an external  
resistor to set the nominal average output current.  
Output current can be adjusted by applying an external  
control signal to the 'ADJ' pin. The ADJ pin will accept  
either a DC voltage or a PWM waveform. During DC  
dimming, this will provide a continuous output current  
that is proportional to the external applied DC voltage.  
During the PWM dimming, this will provide a gated  
output current and the average current is proportional to  
the duty cycle. Applying a voltage of 0.2V or lower to the  
ADJ pin turns the output off and switches the device into  
a low current standby state.  
APPLICATIONS  
Low voltage halogen replacement LEDs  
Automotive lighting  
Low voltage industrial lighting  
LED back-up lighting  
Illuminated signs  
LCD TV backlighting  
The A8180 is available in SOT89-5 Package.  
TYPICAL APPLICATION  
ORDERING INFORMATION  
Package Type  
Part Number  
A8180K5R  
A8180K5VR  
SOT89-5  
SPQ: 1,000pcs/Reel  
K5  
V: Halogen free Package  
R: Tape & Reel  
Note  
AiT provides all RoHS products  
REV3.0  
- APR 2010 RELEASED, JAN 2017 UPDATED -  
- 1 -