AT1312A/B/C
Preliminary Product Information
High Efficiency, Constant Current
White-LEDs Driver
PCB layout guidelines
Careful printed circuit layout is extremely important to avoid causing parasitical
capacitance and line inductance. The following layout guidelines are recommended to
achieve optimum performance.
• Please the boost converter diode and inductor close to the LX pin and no via.
Keep traces short, direct, and wide.
• Please ceramic bypass capacitors near the input/output pin.
• Locate all feedback sense resistors as close to the feedback pins as possible.
• The ground connections of VIN and VOUT should be as close together as possible.
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
2/23/2006 REV:1.1
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
Email: service@aimtron.com.tw
14