Series AM10WM-NZ
10 Watt | DC-DC Converter
Recommended EMC Circuit
LDM
330µH/1A
Single Output
FUSE
15A/1500VDC
LCM
7mH/1A
+ Vout
DC
+ Vout
+ Vin
+ Vin
+
+
+
C7
C8
R1
R2
R3
R4
C1
C2
TVS
+
C6
DC
C9
C3
C4
C5
+
1µF/50V
C10
- Vin
- Vin
- Vout
- Vout
C1, C2, C3 & C4 C7, C8, C9 & C10 R1, R2, R3 & R4
47 µF/450V 100 nF/275V 1MΩ / 2W
C6
TVS
7V
120 µF / 35V
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R16
Tel: +1 514 620 2722
4 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only