AM10BRW-Z
Preliminary
Dimensions
23.80
(0.94)
15.24
(0.60)
1
7
8
9
Top View
Bottom View
16
10
3.01
(0.12)
2.54
(0.10)
Side View
Notes:
All dimensions are typical in millimeters (inches).
Pin diameter : 0.5±0.05 (0.02±0.002)
1
7
8
Pin pitch and length tolerance ±0.35 (±0.014)
Stand-off tolerance ±0.50 (±0.02)
Pin Out Specifications
Single
Pin
1
7
Dual
-V Input
NC
-V Input
Trim
8
9
10
16
NC
Common
+V Output
-V Output
+V Input
+V Output
-V Output
+V Input
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to
www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical
drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless
otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and
other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous
environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance
with Aimtec’s standard Terms of Sale available at www.aimtec.com.
F 052e R4
www.Aimtec.com
6
AIMTEC [ AIMTEC ]
