欢迎访问ic37.com |
会员登录 免费注册
发布采购

MGA-725M4-TR1 参数 Datasheet PDF下载

MGA-725M4-TR1图片预览
型号: MGA-725M4-TR1
PDF下载: 下载PDF文件 查看货源
内容描述: 低噪声放大器,具有旁路开关在微型无铅封装 [Low Noise Amplifier with Bypass Switch In Miniature Leadless Package]
分类和应用: 开关放大器射频微波
文件页数/大小: 20 页 / 189 K
品牌: AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
 浏览型号MGA-725M4-TR1的Datasheet PDF文件第2页浏览型号MGA-725M4-TR1的Datasheet PDF文件第3页浏览型号MGA-725M4-TR1的Datasheet PDF文件第4页浏览型号MGA-725M4-TR1的Datasheet PDF文件第5页浏览型号MGA-725M4-TR1的Datasheet PDF文件第6页浏览型号MGA-725M4-TR1的Datasheet PDF文件第7页浏览型号MGA-725M4-TR1的Datasheet PDF文件第8页浏览型号MGA-725M4-TR1的Datasheet PDF文件第9页  
Agilent MGA-725M4 Low Noise
Amplifier with Bypass Switch In
Miniature Leadless Package
Data Sheet
Features
• Operating frequency:
0.1 GHz ~ 6.0 GHz
• Noise figure:
1.2 dB at 800 MHz
1.4 dB at 1900 MHz
• Gain:
17.5 dB at 800 MHz
15.7 dB at 1900 MHz
• Bypass switch on chip
Loss = typ 1.6 dB (I
d
< 5
µA)
IIP3 = +10 dBm
• Adjustable Input IP3:
+2 to +14.7 dBm
• Miniature package:
1.4 mm x 1.2 mm
2.7 V to 5.0 V operation
Applications
• CDMA (IS-95, J-STD-008) Receiver
LNA
• Transmit Driver Amp
• TDMA (IS-136) handsets
MiniPak 1.4 mm x 1.2 mm Package
Description
Agilent Technologies’s
MGA-725M4 is an economical,
easy-to-use GaAs MMIC Low
Noise Amplifier (LNA), which is
designed for an adaptive CDMA
receiver LNA and adaptive CDMA
transmit driver amplifier.
The MGA-725M4 features a typical
noise figure of 1.4 dB and 14.4 dB
associated gain from a single
stage, feedback FET amplifier.
The output is internally matched
to 50Ω. The input is optimally
internally matched for lowest
noise figure into 50Ω. The input
may be additionally externally
matched for low VSWR through
the addition of a single series
inductor. When set into the bypass
mode, both input and output are
internally matched to 50Ω.
Simplified Schematic
The MGA-725M4 offers an
integrated solution of LNA with
adjustable IIP3. The IIP3 can be
fixed to a desired current level for
the receiver’s linearity require-
ments. The LNA has a bypass
switch function, which sets the
current to zero and provides low
insertion loss. The bypass mode
also boosts dynamic range when
high level signal is being received.
For the CDMA driver amplifier
applications, the MGA-725M4
provides suitable gain and linear-
ity to meet the ACPR requirement
when the handset transmits the
highest power. When transmitting
lower power, the MGA-725M4 can
be bypassed, saving the drawing
current.
The MGA-725M4 is a GaAs MMIC,
processed on Agilent’s cost
effective PHEMT (Pseudomorphic
High Electron Mobility Transistor).
It is housed in the MiniPak 1412
package. It is part of the Agilent
Technologies CDMAdvantage RF
chipset.
Ax
Pin Connections and
Package Marking
GROUND
OUTPUT
Control
Input
&
V
ref
GainFET
Output
& V
d
Ax
INPUT
GROUND
GND
GND