欢迎访问ic37.com |
会员登录 免费注册
发布采购

IAM-91563-TR1 参数 Datasheet PDF下载

IAM-91563-TR1图片预览
型号: IAM-91563-TR1
PDF下载: 下载PDF文件 查看货源
内容描述: 0.8-6 GHz的3V下变频器 [0.8-6 GHz 3V Downconverter]
分类和应用: 电信集成电路光电二极管
文件页数/大小: 16 页 / 196 K
品牌: AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
 浏览型号IAM-91563-TR1的Datasheet PDF文件第2页浏览型号IAM-91563-TR1的Datasheet PDF文件第3页浏览型号IAM-91563-TR1的Datasheet PDF文件第4页浏览型号IAM-91563-TR1的Datasheet PDF文件第5页浏览型号IAM-91563-TR1的Datasheet PDF文件第6页浏览型号IAM-91563-TR1的Datasheet PDF文件第7页浏览型号IAM-91563-TR1的Datasheet PDF文件第8页浏览型号IAM-91563-TR1的Datasheet PDF文件第9页  
0.8 – 6 GHz 3 V Downconverter
Technical Data
IAM-91563
Features
• +0 dBm Input IP
3
at 1.9 GHz
• Single +3V Supply
• 8.5 dB SSB Noise Figure at
1.9 GHz
• 9.0 dB Conversion Gain at
1.9 GHz
• Ultra-miniature Package
Surface Mount Package
SOT-363 (SC-70)
Description
Hewlett-Packard’s IAM-91563 is an
economical 3V GaAs MMIC mixer
used for frequency down-conver-
sion. RF frequency coverage is
from 0.8 to 6 GHz and IF coverage
is from 50 to 700 MHz. Packaged
in the SOT-363 package, this
4.0 sq. mm. package requires half
the board space of a SOT-143 and
only 15% the board space of an
SO-8 package.
At 1.9 GHz, the IAM-91563 pro-
vides 9 dB of conversion gain,
thus eliminating an RF or IF gain
stage normally needed with a
lossy mixer. LO drive power is
nominally only -5 dBm, eliminat-
ing an LO buffer amplifier. The
8.5 dB noise figure is low enough
to allow the system to use a low
cost LNA. The -6 dBm Input IP
3
provides adequate system linearity
for most commercial applications,
but is adjustable to 0 dBm.
The circuit uses GaAs PHEMT
technology with proven reliability,
and uniformity. The MMIC
consists of a cascode FET struc-
ture that provides unbalanced gm
modulation type mixing. An on-
chip LO buffer amp drives the
mixer while bias circuitry allows a
single +3V supply (through a
choked IF port). The LO port is
internally matched to 50
Ω.
The
RF and IF ports are high imped-
ance and require external match-
ing networks.
5965-9973E
Applications
• Downconverter for PCS,
PHS, ISM, WLL, and other
Wireless Applications
Pin Connections and
Package Marking
LO 1
6 IF and V
d
91
GND 2
RF 3
5 GND
4 SOURCE
BYPASS
Note:
1. Package marking provides orienta-
tion and identification.
Simplified Schematic
IF and V
d
6
LO
1
SOURCE
BYPASS
RF
3
GROUND
2, 5
4
7-135