6
Yellow
Device
Series
Parameter
Symbol Min.
Typ. Max.
Units
Test Conditions
5082-762x Luminous Intensity/Segment[1,2]
(Digit Average)
205
620
µcd
IF = 5 mA
IV
5082-766x
290
835
µcd
V
IF = 5 mA
Forward Voltage/Segment or DP
Peak Wavelength
VF
2.2
2.5
IF = 20 mA
λPEAK
583
nm
nm
V
Dominant Wavelength[3,7]
All
λd
VR
581.5
3.0
586 592.5
Reverse Voltage/Segment or DP[4]
40
-2
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
280
°C/W/Seg
High Performance Green
Device
Test
Series
Parameter
Symbol Min.
Typ. Max.
Units
Conditions
HDSP-360x Luminous Intensity/Segment[1,2]
(Digit Average)
860
2700
µcd
IF = 10 mA
IV
HDSP-460x
1030 4000
µcd
V
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
VF
λPEAK
λd
2.1
566
571
50
2.5
nm
nm
V
Dominant Wavelength[3,7]
All
577
Reverse Voltage/Segment or DP[4]
VR
3.0
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
280
°C/W/Seg
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin
for pin compatible with the HDSP-E15X series.
6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for
pin compatible with the 5082-7650 series.
7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
