Package Characteristics
All Typicals at T
A
= 25°C.
Parameter
Input-Output Insulation
Symbol
I
I-O
Min.
Typ.
Max.
1
Units
µA
Test Conditions
45% RH, t = 5 s
V
I-O
= 3 kV dc,
T
A
= 25°C
RH
≤
50%, t = 1 min.,
T
A
= 25°C
V
I-O
= 500 V dc
f = 1 MHz, T
A
= 25°C
Input-Output Momentary
Withstand Voltage
Input-Output Resistance
Input-Output Capacitance
V
ISO
R
I-O
C
I-O
2500
10
12
0.6
Vrms
Ω
pF
Notes:
1. t
PHL
propagation delay is measured from the 50% level on the risiing edge of the input pulse to the 2.5 V level of the falling edge
of the V
O
signal. t
PLH
propagation delay is measured from the 50% level on the falling edge of the input pulse to the 2.5 V level of
the rising edge of the V
O
signal.
2. PWD is defined as |t
PHL
- t
PLH
|.
3. t
PSK
is equal to the magnitude of the worst case difference in t
PHL
and/or t
PLH
that will be seen between units at any given
temperature within the recommended operating conditions.
4. CM
H
is the maximum tolerable rate of rise of the common mode voltage to assure that the output will remain in a high logic state.
5. CM
L
is the maximum tolerable rate of fall of the common mode voltage to assure that the output will remain in a low logic state.
6
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
