Agilent 35670A Specifications
Instrument specifications apply after 15 minutes warm-up
and within 2 hours of the last self-calibration. When the
internal cooling fan has been turned OFF, specifications
apply within 5 minutes of the last self-calibration. All speci-
fications are with 400 line frequency resolution and with
anti-alias filters enabled unless stated otherwise.
Accuracy
Frequency
±30 ppm (.003ꢀ)
Maximum range**
Single channel ampltude
1 channel mode
102.4 kHz,
Absolute amplitude accuracy (FFT)
(A combination of full scale accuracy, full scale flatness,
and amplitude linearity.)
51.2 kHz (opt AY6*)
51.2 kHz
2 channel mode
4 channel mode (Option AY6 only) 25.6 kHz
Spans
1 channel mode
2 channel mode
4 channel mode (Option AY6 only) 97.7 mHz to 25.6 kHz
Minimimum resolution
1 channel mode
±2.92ꢀ (0.25 dB) of reading
±0.025ꢀ of full scale
195.3 mHz to 102.4 kHz
97.7 mHz to 51.2 kHz
FFT full scale accuracy at 1 kHz (0 dBfs)
±0.15 dB (1.74ꢀ)
FFT full scale flatness (0 dBfs) relative to 1 kHz
±0.2 dB (2.33ꢀ)
122 µHz (1600 line
display)
61 µHz (1600 line
display)
FFT amplitude linearity at 1 kHz measured on +27 dBVrms
range with time avg, 0 to -80 dBfs
±0.58ꢀ (0.05 dB) of reading
2 channel mode
±0.025ꢀ of full scale
Amplitude resolution
4 channel mode (Option AY6 only) 122 µHz (800 line
display)
Maximum real-time bandwidth
FFT span for continuous data acquistion)
(Preset, fast averaging)
(16 bits less 2 dB over-range) with averaging 0.0019ꢀ of
full scale (typical)
Residual DC response (FFT mode)
Frequency display (excludes A-weight filter)
<-30 dBfs or 0.5 mVdc
1 channel mode
2 channel mode
25.6 kHz
12.8 kHz
FFT dynamic range
4 channel mode (Option AY6 only) 6.4 kHz
Spurious free dynamic range
(Includes spurs, harmonic distortion, intermodulation
distortion, alias products). Excludes alias responses at
extremes of span.
Measurement rate
(Typical) (Preset, fast averaging)
1 channel mode
2 channel mode
≥ 70 averages/sec
≥ 33 averages/sec
Source impedence = 50 Ω.
4 channel mode (Option AY6 only) ≥ 15 averages/sec
Display update rate
800 line display.
90 dB typical (<-80 dBfs)
Typical (Preset, fast average off) ≥ 5 updates/Sec
*
Option AY6 single channel maximum range extends to 102.4 kHz
without anti-alias filter protection.
Maximum
≥ 9 updates/Sec
(Preset, fast average off, single channel, single display,
undisplayed trace displays set to data registers)
** Show all lines mode allows display of up to 131.1, 65.5 and 32.7
kHz respectively. Amplitudes accuracy is unspecified and not alias
protected.
4