Agilent 16720A Pattern Generator Specifications and Characteristics
Agilent 10469A 5 volt PECL Data Pod
42 Ω
348 Ω
100EL90
Output type
100EL90 (5V) with 348 ohm pulldown to
ground and 42 ohm in series
Maximum clock
Skew [1]
300 MHz
typical < 500 ps; worst case = 1 ns
Recommended lead set Agilent 10498A
Agilent 10471A 3.3 volt LVPECL Data Pod
42 Ω
215 Ω
100LVEL90
Output type
100LVEL90 (3.3V) with 215 ohm pulldown
to ground and 42 ohm in series
Maximum clock
Skew [1]
300 MHz
typical < 500 ps; worst case = 1 ns
Recommended lead set Agilent 10498A
Agilent 10473A 3-State 2.5 Volt Data Pod
74AVC16244
Output type
74AVC16244
3-state enable
negative true, 38 KΩ to GND, enabled
on no connect
Maximum clock
Skew [1]
300 MHz
typical < 1.5 ns; worst case = 2 ns
Recommended lead set Agilent 10498A
[1] Typical skew measurements made at pod connector with approximately 10 pF/50
KΩ load to GND; worst case skew numbers are a calculation of worst case
conditions through circuits. Both numbers apply to any channel within a single or
multiple module system.
[2] Channel 7 on the 3-state pods has been brought out in parallel as a non 3-state
signal. By looping this output back into the 3-state enable line, the channel can be
used as a 3-state enable.
26