Ordering Information
11974A 26.5 to 40 GHz
11974Q 33 to 50 GHz
11974U 40 to 60 GHz
11974V 50 to 75 GHz
Option 11974X-001:
Input isolator
attached and included in calibration
(Note: X = A, Q, U or V)
Option 11974X-003:
Exclusion of
power supply (Note: X = A, Q, U or V)
5062-3989:
Front handle kit for power
supply
5062-3957:
Rack mount kit with
extended flange for power supply
(half-width)
Warranty and service
Standard warranty is 12 months.
Option R-51B:
Return-to-Agilent
warranty and service
Calibration
R-50C-001:
Standard calibration
R-50C-002:
Standard compliant
calibration
E4407B 26.5 GHZ rugged portable
71100C 2.9 GHz modular
71200C 22/26.5 GHz modular
71210C 22 GHz modular
70907B external mixer interface
module
8566B 22 GHz benchtop
11975A LO amplifier
Compatible spectrum analyzers
E4440A 3 Hz to 26.5 GHz
high-performance
E4446A 3 Hz to 44 GHz
high-performance
E4448A 3 Hz to 50 GHz
high-performance
8560EC 2.9 GHz rugged portable
8561EC 6.5 GHz rugged portable
8562EC 13.2 GHz rugged portable
8563EC 26.5 GHz rugged portable
8564EC 40 GHz rugged portable
8565EC 50 GHz rugged portable
Other related accessories available
from Agilent Technologies:
281A/B waveguide with 2.4-mm coax
adapters
382A attenuators for R, Q, and U
bands only
373D/G 20/50 dB fixed attenuators
370A/B/C 3 dB, 6 dB, and 10 dB
fixed attenuators for Q and U bands
only
800 Series waveguide bends, twists,
and straight sections
365A Series waveguide isolators for
R, Q, U, and V bands
Note: An 8562A can be made
hardware compatible with the 11974
Series by installing the 8562A-K74
upgrade kit. Limitations of using an
8562A with the 11974 Series are
indicated in footnote 1 below.
1. Operation with 11974 Series will require entry of a frequency offset. Preselector peaking is performed manually with a screwdriver adjustment. Sweep times must be
manually controlled in wide spans to avoid oversweeping the preselector.
7
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
