欢迎访问ic37.com |
会员登录 免费注册
发布采购

11974Q 参数 Datasheet PDF下载

11974Q图片预览
型号: 11974Q
PDF下载: 下载PDF文件 查看货源
内容描述: 可在四个频段从26.5到75 GHz的毫米波预选混频器的RF部分 [Preselected Millimeter Mixers RF Sections Available in Four Bands from 26.5 to 75 GHz]
分类和应用:
文件页数/大小: 8 页 / 244 K
品牌: AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
 浏览型号11974Q的Datasheet PDF文件第1页浏览型号11974Q的Datasheet PDF文件第2页浏览型号11974Q的Datasheet PDF文件第3页浏览型号11974Q的Datasheet PDF文件第5页浏览型号11974Q的Datasheet PDF文件第6页浏览型号11974Q的Datasheet PDF文件第7页浏览型号11974Q的Datasheet PDF文件第8页  
Specifications  
Amplitude  
Inputs and outputs  
(all values are nominal)  
LO input  
Connector type SMA (f)  
Frequency range  
Options  
Option 001: Input isolator attached  
and included in calibration. An input  
isolator provides a specified broadband  
RF input match. This is important  
when the device under test requires  
protection from out-of-band reflections  
off the 11974’s input tracking filter.  
With Option 001, the 11974 conversion  
loss is calibrated with the input isolator  
in place so that system amplitude  
accuracy is maintained.  
Third-order intercept (nominal)  
(For two signals spaced less than  
200 MHz apart)  
11974A  
11974Q  
11974U  
11974V  
≥ +13 dBm  
≥ +13 dBm  
≥ +13 dBm  
≥ +13 dBm  
11974A  
11974Q  
11974U  
11974V  
Maximum LO  
input level  
3.3 GHz to 5 GHz  
3.3 GHz to 5 GHz  
4 GHz to 6 GHz  
3.5 GHz to 5.3 GHz  
+14.5 dBm to 16 dBm  
IF subharmonic response (nominal)  
Intercept (2nd order; response at  
fIF/2 above input signal)  
Specifications changes for Option 001  
Amplitude  
Displayed average noise level and  
maximum conversion loss: Add +2 dB  
to the standard specifications for A, Q,  
and U bands; add +3 dB for V band.  
VSWR  
< 2.0:1 (50 Ω)  
fIF/2 = 160.7 MHz  
(8566B/71000C)  
IF output  
Connector type  
Match  
fIF/2 = 155.35 MHz  
SMA (f)  
< 1.6:1 (50 Ω)  
(8563A/62A/61B/60A)  
11974A  
11974Q  
11974U  
11974V  
≥ +45 dBm  
≥ +45 dBm  
≥ +45 dBm  
≥ +30 dBm  
Tune + span input  
Connector type  
BNC (f)  
RF input VSWR  
(across full waveguide band)  
11974A, Q, U  
11974V  
< 1.6:1  
< 2.3:1  
Dynamic range  
Refer to Figure 3  
Inputs and outputs  
(all values are nominal)  
–20  
–30  
–40  
RF input  
Displayed  
Waveguide size, flange type  
average  
noise floor  
Size  
Flange  
Second order  
IF subharmonic  
distortion  
11974A  
11974Q  
11974U  
11974V  
WR-28  
WR-22  
WR-19  
WR-15  
+25 dBm  
UG 599/U  
UG 383/U  
UG 383/U-M  
UG 385/U  
–50  
–60  
Image and  
multiple  
response  
–70  
Maximum  
RF input  
level (CW,  
peak, or  
Third order  
–80  
intermod  
(≤ 200 MHz  
signal separation)  
–90  
average)  
–100  
VSWR (at  
peak of  
< 3.0:1  
–110  
–120  
–130  
preselector  
filter)  
–70 –60 –50 –40 –30 –20 –10  
RF input (dBm)  
0
+10 +20  
Figure 3. Agilent 11974A system dynamic range  
4