OP27
(Continued from page 1)
The OP27 provides excellent performance in low-noise, high-
accuracy amplification of low-level signals. Applications include
stable integrators, precision summing amplifiers, precision voltage-
threshold detectors, comparators, and professional audio circuits
such as tape-head and microphone preamplifiers.
PSRR and CMRR exceed 120 dB. These characteristics, coupled
with long-term drift of 0.2 µV/month, allow the circuit designer
to achieve performance levels previously attained only by dis-
crete designs.
The OP27 is a direct replacement for 725, OP06, OP07, and
OP45 amplifiers; 741 types may be directly replaced by remov-
ing the 741’s nulling potentiometer.
Low-cost, high-volume production of OP27 is achieved by
using an on-chip Zener zap-trimming network. This reliable
and stable offset trimming scheme has proved its effectiveness
over many years of production history.
ABSOLUTE MAXIMUM RATINGS4
3
Package Type
ꢃJA
ꢃJC
Unit
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22 V
22 V
Input Voltage1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TO 99 (J)
150
18
16
43
38
43
°C/W
°C/W
°C/W
°C/W
°C/W
8-Lead Hermetic DlP (Z) 148
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . 0.7 V
Differential Input Current2 . . . . . . . . . . . . . . . . . . . . 25 mA
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP27A, OP27C (J, Z) . . . . . . . . . . . . . . . . –55°C to +125°C
OP27E, OP27F (J, Z) . . . . . . . . . . . . . . . . . –25°C to +85°C
OP27E, OP27F (P) . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
OP27G (P, S, J, Z) . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . 300°C
Junction Temperature . . . . . . . . . . . . . . . . . –65°C to +150°C
8-Lead Plastic DIP (P)
20-Contact LCC (RC)
8-Lead SO (S)
103
98
158
NOTES
1For supply voltages less than 22 V, the absolute maximum input voltage is
equal to the supply voltage.
2The OP27’s inputs are protected by back-to-back diodes. Current limiting
resistors are not used in order to achieve low noise. If differential input voltage
exceeds 0.7 V, the input current should be limited to 25 mA.
JA is specified for worst-case mounting conditions, i.e., JA is specified for
device in socket for TO, CERDIP, and P-DIP packages; JA is specified for
device soldered to printed circuit board for SO package.
4Absolute Maximum Ratings apply to both DICE and packaged parts, unless
otherwise noted.
3
ORDERING INFORMATION1
Package
TA = 25°C
OS Max
(µV)
Operating
Temperature
Range
V
CERDIP
8-Lead
Plastic
8-Lead
TO-99
25
25
60
100
100
100
OP27AJ2, 3
OP27AZ2
OP27EZ
MIL
OP27EJ2, 3
OP27EP
OP27FP3
IND/COM
IND/COM
MIL
XIND
XIND
OP27CZ3
OP27GZ
OP27GJ
OP27GP
OP27GS4
NOTES
1Burn-in is available on commercial and industrial temperature range parts in CERDIP, plastic
DIP, and TO-can packages.
2For devices processed in total compliance to MIL-STD-883, add /883 after part number.
Consult factory for 883 data sheet.
3Not for new design; obsolete April 2002.
4For availability and burn-in information on SO and PLCC packages, contact your local
sales office.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP27 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. A
–7–