/
374E
v00.0405
SMT PHEMT LOW NOISE
AMPLIFIER, 0.3 - 3.0 GHz
Evaluation PCB
8
LOW NOISE AMPLIFIERS - SMT
List of Materials for Evaluation PCB 109258
[1]
Item
J1, J2
J3, J4
C1, C2
C3
C4
L1
U1
PCB
[2]
Description
PCB Mount SMA Connector
DC Pin
150 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
4.7 Capacitor, Tantalum
27 nH Inductor, 0603 Pkg.
109256 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown above. A suffi-
cient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite
Way, P.O. Box 9106, Norwood, MA 02062-9106
Microwave Corporation:
One Technology
20 Alpha Road, Chelmsford, MA 01824 Phone:
Phone: 781-329-4700 • Order online at www.analog.com
978-250-3343 Fax: 978-250-3373
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
8 - 65