HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Evaluation PCB
9
List of Materials for Evaluation PCB 101830 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Item
J1 - J3
U1
Description
PCB Mount SMA RF Connector
HMC214MS8 / HMC214MS8E Mixer
101828 Eval Board
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assFumoerd bpyrAincaelog, Ddeevicleivs eforriyts,uasen, ndor tfoor apnylainfcrinegeomerndtseorfspa,tepntlseoar ostheercontact Hittite Microwave Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 83
Order On-line at www.hittite.com