10-Bit, 4× Oversampling
SDTV Video Decoder
ADV7180
Data Sheet
FEATURES
APPLICATIONS
Qualified for automotive applications
Digital camcorders and PDAs
Worldwide NTSC/PAL/SECAM color demodulation support
One 10-bit ADC, 4× oversampling for CVBS, 2× oversampling
for Y/C mode, and 2× oversampling for YPrPb (per channel)
3 video input channels with on-chip antialiasing filter
CVBS (composite), Y/C (S-Video), and YPrPb (component)
video input support
Low cost SDTV PIP decoders for digital TVs
Multichannel DVRs for video security
AV receivers and video transcoding
PCI-/USB-based video capture and TV tuner cards
Personal media players and recorders
Smartphone/multimedia handsets
5-line adaptive comb filters and CTI/DNR video
enhancement
In-car/automotive infotainment units
Rearview camera/vehicle safety systems
Mini-TBC functionality provided by adaptive digital line
length tracking (ADLLT), signal processing, and enhanced
FIFO management
FUNCTIONAL BLOCK DIAGRAM
CLOCK PROCESSING BLOCK
XTAL1
LLC
Integrated AGC with adaptive peak white mode
Macrovision copy protection detection
NTSC/PAL/SECAM autodetection
8-bit ITU-R BT.656 YCrCb 4:2:2 output and HS, VS, and FIELD1
1.0 V analog input signal range
Full-featured VBI data slicer with teletext support (WST)
Power-down mode and ultralow sleep mode current
2-wire serial MPU interface (I2C compatible)
Single 1.8 V supply possible
PLL
ADLLT PROCESSING
XTAL
2
ANALOG
VIDEO
INPUTS
8-BIT/16-BIT
PIXEL DATA
DIGITAL
PROCESSING
BLOCK
10-BIT, 86MHz
ADC
P15 TO P0
A
A
A
1
2
IN
IN
IN
AA
FILTER
2D COMB
VS
HS
3
1
AA
FILTER
SHA
A/D
VBI SLICER
A
4
5
6
IN
IN
IN
3
FIELD
1
1
A
A
AA
FILTER
5
COLOR
DEMOD
GPO
SFL
INTRQ
2
REFERENCE
I C/CONTROL
ADV7180
1.8 V analog, 1.8 V PLL, 1.8 V digital, 1.8 V to 3.3 V I/O supply
−10°C to +70°C commercial temperature grade
−40°C to +85°C industrial/automotive qualified temperature
grade
4
SCLK SDATA ALSB RESET PWRDWN
1
2
3
4
5
ONLY AVAILABLE ON 64-LEAD PACKAGE AND 48-LEAD PACKAGES.
16-BIT ONLY AVAILABLE ON 64-LEAD PACKAGE.
48-LEAD, 40-LEAD, AND 32-LEAD PACKAGE USES ONE LEAD FOR VS/FIELD.
NOT AVAILABLE ON 32-LEAD PACKAGE.
ONLY AVAILABLE ON 48-LEAD AND 64-LEAD PACKAGES.
Figure 1.
−40°C to +125°C temperature grade for automotive qualified
4 package types
64-lead, 10 mm × 10 mm, RoHS-compliant LQFP
48-Lead, 7 mm × 7 mm, RoHS-compliant LQFP
40-lead, 6 mm × 6 mm, RoHS-compliant LFCSP
32-lead, 5 mm × 5 mm, RoHS-compliant LFCSP
video performance for consumer applications with true 8-bit
data resolution. Three analog video input channels accept standard
composite, S-Video, or component video signals, supporting a
wide range of consumer video sources. AGC and clamp-restore
circuitry allow an input video signal peak-to-peak range to 1.0 V.
Alternatively, these can be bypassed for manual settings.
GENERAL DESCRIPTION
The line-locked clock output allows the output data rate, timing
signals, and output clock signals to be synchronous, asynchronous, or
line locked even with 5% line length variation. Output control
signals allow glueless interface connections in many applications.
The ADV7180 is programmed via a 2-wire, serial bidirectional port
(I2C® compatible) and is fabricated in a 1.8 V CMOS process. Its
monolithic CMOS construction ensures greater functionality with
lower power dissipation. LFCSP package options make the decoder
ideal for space-constrained portable applications. The 64-lead
LQFP package is pin compatible with the ADV7181C.
The ADV7180 automatically detects and converts standard
analog baseband television signals compatible with worldwide
NTSC, PAL, and SECAM standards into 4:2:2 component video
data compatible with the 8-bit ITU-R BT.656 interface standard.
The simple digital output interface connects gluelessly to a wide
range of MPEG encoders, codecs, mobile video processors, and
Analog Devices, Inc., digital video encoders, such as the ADV7391.
External HS, VS, and FIELD signals provide timing references
for LCD controllers and other video ASICs, if required. Accurate
10-bit analog-to-digital conversion provides professional quality
1 The 48-Lead LQFP, 40-lead LFCSP, and 32-lead LFCSP use one pin to output
VS or FIELD.
Rev. G
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006-2012 Analog Devices, Inc. All rights reserved.
ADI [ ADI ]
