ADuM1200/ADuM1201
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Symbol
RI-O
CI-O
Min
Typ
1012
1.0
Max
Unit
Ω
pF
Test Conditions
Resistance (Input-Output)1
Capacitance (Input-Output)1
Input Capacitance
f = 1 MHz
CI
4.0
pF
IC Junction-to-Case Thermal Resistance, Side 1
θJCI
46
°C/W
Thermocouple located at center of
package underside
IC Junction-to-Case Thermal Resistance, Side 2
θJCO
41
°C/W
1 The device is considered a 2-terminal device; Pins 1, 2, 3, and 4 are shorted together, and Pins 5, 6, 7, and 8 are shorted together.
REGULATORY INFORMATION
The ADuM1200/ADuM1201 have been approved by the following organizations:
Table 5.
UL
CSA
VDE
Recognized under 1577 Component
Recognition Program1
Approved under CSA Component
Acceptance Notice #5A
Certified according to
DIN EN 60747-5-2 (VDE 0884 Part 2): 2003-012
2500 V rms isolation voltage
Basic insulation, 560 V peak
Complies with DIN EN 60747-5-2 (VDE 0884
Part 2): 2003-01, DIN EN 60950 (VDE 0805): 2001-12;
EN 60950: 2000, Reinforced insulation, 560 V peak
File 2471900-4880-0001
File E214100
File 205078
1 In accordance with UL1577, each ADuM120x is proof-tested by applying an insulation test voltage ≥ 3000 V rms for 1 second (current leakage detection limit = 5 µA).
2 In accordance with DIN EN 60747-5-2, each ADuM120x is proof-tested by applying an insulation test voltage ≥ 1050 V peak for 1 second (partial discharge detection
limit = 5 pC).
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Symbol Value
Unit
V rms
mm
Conditions
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
2500
1 minute duration
Measured from input terminals to output terminals, shortest
distance through air
L(I01)
4.90 min
Minimum External Tracking (Creepage) L(I02)
4.01 min
0.017 min
>175
mm
mm
V
Measured from input terminals to output terminals, shortest
distance path along body
Insulation distance through insulation
Minimum Internal Gap (Internal
Clearance)
Tracking Resistance (Comparative
Tracking Index)
CTI
DIN IEC 112/VDE 0303 Part 1
Isolation Group
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Rev. B | Page 10 of 20