ADM231L–ADM234L/ADM236L–ADM241L
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter
V
CC
V+
V–
Input Voltages
T
IN
R
IN
Output Voltages
T
OUT
R
OUT
Short-Circuit Duration
T
OUT
Power Dissipation
N-14 PDIP (Derate 10 mW/°C
above 70°C)
N-16 PDIP (Derate 10.5 mW/°C
above 70°C)
N-20 PDIP (Derate 11 mW/°C
above 70°C)
N-24-1 PDIP (Derate
13.5 mW/°C above 70°C)
R-16 SOIC (Derate 9 mW/°C
above 70°C)
R-24 SOIC (Derate 12 mW/°C
above 70°C)
R-28 SOIC (Derate 12.5 mW/°C
above 70°C)
RS-28 SSOP (Derate 10 mW/°C
above 70°C)
Rating
–0.3 V to +6 V
(V
CC
– 0.3 V) to +14 V
+0.3 V to −14 V
–0.3 V to (V
CC
+ 0.3 V)
±30 V
(V+, +0.3 V) to (V–, –0.3 V)
–0.3 V to (V
CC
+ 0.3 V)
Continuous
800 mW
840 mW
890 mW
1000 mW
760 mW
850 mW
900 mW
900 mW
Parameter
Q-14 CERDIP (Derate 10 mW/°C
above 70°C)
Q-16 CERDIP (Derate 10 mW/°C
above 70•C)
Q-24 CERDIP (Derate
12.5 mW/°C above 70°C)
Thermal Impedance, θ
JA
N-14 PDIP
N-16 PDIP
N-20 PDIP
N-24-1 PDIP
R-16 SOIC
R-24 SOIC
R-28 SOIC
RS-28 SSOP
Q-14 CERDIP
Q-16 CERDIP
Q-24 CERDIP
Operating Temperature Range
Commercial (J Version)
Industrial (A Version)
Storage Temperature Range
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
Rating
720 mW
800 mW
1000 mW
140°C/W
135°C/W
125°C/W
120°C/W
105°C/W
85°C/W
80°C/W
100°C/W
105°C/W
100°C/W
55°C/W
0°C to 70°C
−40°C to +85°C
−65°C to +150°C
300°C
215°C
220° C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods of
time may affect device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. C | Page 4 of 20
AD [ ANALOG DEVICES ]
