ADM206–ADM211/ADM213
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter
V
CC
V+
V–
Input Voltages
T
IN
R
IN
Output Voltages
T
OUT
R
OUT
Short-Circuit Duration
T
OUT
Power Dissipation
N-24 PDIP (Derate 13.5 mW/°C
above 70°C)
R-24 SOIC (Derate 12 mW/°C
above 70°C)
R-28 SOIC (Derate 12.5 mW/°C
above 70°C)
RS-24 SSOP (Derate 12 mW/°C
above 70°C)
RS-28 SSOP (Derate 10 mW/°C
above 70°C)
Thermal Impedance, θ
JA
N-24 PDIP
R-24 SOIC
R-28 SOIC
RS-24 SSOP
RS-28 SSOP
Operating Temperature Range
Industrial (A Version)
Storage Temperature Range
Lead Temperature, Soldering
Vapor Phase (60 s)
Infrared (15 s)
Min
–0.3 V to +6 V
(V
CC
– 0.3 V) to +14 V
+0.3 V to –14 V
–0.3 V to (V
CC
+ 0.3 V)
±30 V
(V+, +0.3 V) to (V–, –0.3 V)
–0.3 V to (V
CC
+ 0.3 V)
Continuous
1000 mW
850 mW
900 mW
850 mW
900 mW
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods of
time may affect device reliability.
120°C/W
85°C/W
80°C/W
115°C/W
100°C/W
–40°C to +85°C
–65°C to +150°C
300°C
215°C
220°
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. C | Page 4 of 16
AD [ ANALOG DEVICES ]
