REVISIONS
LTR
A
DESCRIPTION
Change to military drawing format. Page 2, add device type 02. Page 6, table
I, add device type 02 characteristic. Page 8, 6.4 add vendor. Editorial
changes throughout.
Add device types 03 and 04. Add case outline 2. Add vendors CAGE 34031
and 64155. For 1.3 change footnotes 1/ and 2/ and delete footnotes 3/ and 4/.
Change vendor similar part number for CAGE 07263 and change vendor
CAGE 07263 to 27014. Add footnotes 7/, 8/, and 9/ to table I and change
footnote 1/. Delete latch setup test and subgroup 12. Change drawing CAGE
to 67268. Editorial changes throughout. Add latch enable voltage to the
recommended operating conditions. Add latch enable propagation delay to
table I to be tested. Delete vendor CAGE 27014.
Changes in accordance with NOR 5962-R054-93.
Drawing updated to reflect current requirements. -rrp
DATE (YR-MO-DA)
87-05-11
APPROVED
M. A.FRYE
B
89-05-09
M. A. FRYE
C
D
93-04-07
07-12-03
M. A. FRYE
R. HEBER
THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED.
CURRENT CAGE CODE 67268
REV
SHEET
REV
SHEET
REV STATUS
OF SHEETS
PMIC N/A
REV
SHEET
D
1
D
2
D
3
D
4
D
5
D
6
D
7
D
8
D
9
PREPARED BY
JOSEPH A. KERBY
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
RAY MONNIN
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
APPROVED BY
MICHAEL A. FRYE
MICROCIRCUIT, LINEAR, HIGH-SPEED VOLTAGE
COMPARATOR, MONOLITHIC SILICON
DRAWING APPROVAL DATE
85-11-14
AMSC N/A
REVISION LEVEL
D
SIZE
A
SHEET
CAGE CODE
14933
1 OF
9
86008
DSCC FORM 2233
APR 97
5962-E560-06
AD [ ANALOG DEVICES ]
