AD8051/AD8052/AD8054
ABSOLUTE MAXIMUM RATINGS1
plastic encapsulated devices is determined by the glass transi-
tion temperature of the plastic, approximately +150°C. Tempo-
rarily exceeding this limit may cause a shift in parametric
performance due to a change in the stresses exerted on the die by
the package. Exceeding a junction temperature of +175°C for an
extended period can result in device failure.
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 V
Internal Power Dissipation2
Small Outline Package (R) . . . Observe Power Derating Curves
SOT-23-5 Package . . . . . . . . Observe Power Derating Curves
µSOIC Package . . . . . . . . . . Observe Power Derating Curves
TSSOP-14 Package . . . . . . . Observe Power Derating Curves
Input Voltage (Common Mode) . . . . . . . . . . . . . . . . . . . . ±VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . ±2.5 V
Output Short Circuit Duration
. . . . . . . . . . . . . . . . . . . . . . Observe Power Derating Curves
Storage Temperature Range (R) . . . . . . . . . –65°C to +125°C
Operating Temperature Range (A Grade) . . . –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C
While the AD8051/AD8052/AD8054 are internally short circuit
protected, this may not be sufficient to guarantee that the maxi-
mum junction temperature (+150°C) is not exceeded under
all conditions. To ensure proper operation, it is necessary to ob-
serve the maximum power derating curves.
2.0
14-LEAD SOIC
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Specification is for device in free air:
8-Lead SOIC: θJA = 155°C/W
5-Lead SOT-23-5: θJA = 240°C/W
8-Lead µSOIC: θJA = 200°C/W
14-Lead SOIC: θJA = 120°C/W
1.5
8-LEAD SOIC
PACKAGE
T
= +150؇C
J
14-LEAD TSSOP-14
1.0
0.5
0
SOIC
SOT-23-5
14-Lead TSSOP: θJA = 180°C/W
MAXIMUM POWER DISSIPATION
–50 –40 –30 –20 –10
0
10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE – ؇C
The maximum power that can be safely dissipated by the AD8051/
AD8052/AD8054 is limited by the associated rise in junction
temperature. The maximum safe junction temperature for
Figure 2. Plot of Maximum Power Dissipation vs.
Temperature for AD8051/AD8052/AD8054
ORDERING GUIDE
Temperature
Range
Package
Descriptions
Package
Options* Code
Brand
Model
AD8051AR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
8-Lead SOIC
SO-8
AD8051AR-REEL
AD8051AR-REEL7
AD8051ART-REEL
13" Tape and Reel SO-8
7" Tape and Reel SO-8
13" Tape and Reel RT-5
H2A
H2A
AD8051ART-REEL7 –40°C to +85°C
7" Tape and Reel
RT-5
AD8052AR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
8-Lead SOIC
13" Tape and Reel SO-8
7" Tape and Reel
8-Lead µSOIC
SO-8
AD8052AR-REEL
AD8052AR-REEL7
AD8052ARM
SO-8
RM-8
H4A
H4A
H4A
AD8052ARM-REEL
13" Tape and Reel RM-8
AD8052ARM-REEL7 –40°C to +85°C
7" Tape and Reel
RM-8
AD8054AR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
14-Lead SOIC
13" Tape and Reel R-14
7" Tape and Reel
14-Lead µSOIC
R-14
AD8054AR-REEL
AD8054AR-REEL7
AD8054ARU
R-14
RU-14
AD8054ARU-REEL
13" Tape and Reel RU-14
AD8054ARU-REEL7 –40°C to +85°C
7" Tape and Reel RU-14
*R = Small Outline; RM = Micro Small Outline; RT = Surface Mount; RU = TSSOP .
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD8051/AD8052/AD8054 feature proprietary ESD protection circuitry, perma-
nent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper
ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. B
–5–