AD706
SPECIFICATIONS (continued)
AD706J/A
Typ
Parameter
Conditions
Min
Max
Unit
POWER SUPPLY
Rated Performance
Operating Range
15
V
V
mA
mA
2.0
18
1.2
1.4
Quiescent Current, Total
0.75
0.8
TMIN to TMAX
TRANSISTOR COUNT
Number of Transistors
90
NOTES
1Bias current specifications are guaranteed maximum at either input.
2Input bias current match is the difference between corresponding inputs (IB of –IN of Amplifier 1 minus IB of –IN of Amplifier 2).
∆VOS1
∆VCM
∆VOS2
∆VCM
CMRR match is the difference between
for Amplifier 1 and
for Amplifier 2, expressed in dB.
∆VOS1
∆VOS2
∆VSUPPLY
PSRR match is the difference between
for Amplifier 1 and
for Amplifier 2, expressed in dB.
∆VSUPPLY
All min and max specifications are guaranteed.
Specifications subject to change without notice.
ORDERING GUIDE
Temperature
ABSOLUTE MAXIMUM RATINGS1
Package
Description Option
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Internal Power Dissipation
Model
Range
AD706JN
AD706JR
AD706JR-REEL
AD706JR-REEL7 0°C to 70°C
AD706AR
AD706AR-REEL
0°C to 70°C
0°C to 70°C
0°C to 70°C
Plastic DIP
SOIC
N-8
R-8
(Total: Both Amplifiers)2 . . . . . . . . . . . . . . . . . . . . 650 mW
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS
Differential Input Voltage3 . . . . . . . . . . . . . . . . . . . . . . +0.7 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range (N, R) . . . . . . . –65°C to +125°C
Operating Temperature Range
Tape and Reel R-8
Tape and Reel R-8
–40°C to +85°C SOIC
R-8
–40°C to +85°C Tape and Reel R-8
AD706AR-REEL7 –40°C to +85°C Tape and Reel R-8
AD706J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
AD706A . . . . . . . . . . . . . . . . . . . . . . . . . . . .–40°C to +85°C
Lead Temperature (Soldering 10 secs) . . . . . . . . . . . . . 300°C
AD706ARZ-REEL* –40°C to +85°C Tape and Reel R-8
*Lead-free part.
NOTES
METALIZATION PHOTOGRAPH
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Specification is for device in free air:
Dimensions shown in inches and (mm).
Contact factory for latest dimensions.
1
OUTPUT A
+V
8-Lead Plastic Package: θJA = 100°C/W
8
S
8-Lead Small Outline Package: θJA = 155°C/W
3The input pins of this amplifier are protected by back-to-back diodes. If the
differential voltage exceeds 0.7 V, external series protection resistors should be
added to limit the input current to less than 25 mA.
2
–INPUT A
+INPUT A
OUTPUT B
7
3
6
5
–INPUT B
+INPUT B
–V
S
4
0.074 (1.88)
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD706 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. E
–3–
ADI [ ADI ]
