欢迎访问ic37.com |
会员登录 免费注册
发布采购

AD694AR 参数 Datasheet PDF下载

AD694AR图片预览
型号: AD694AR
PDF下载: 下载PDF文件 查看货源
内容描述: 4.20毫安变送器 [4.20 mA Transmitter]
分类和应用: 模拟IC信号电路光电二极管
文件页数/大小: 12 页 / 428 K
品牌: AD [ ANALOG DEVICES ]
 浏览型号AD694AR的Datasheet PDF文件第2页浏览型号AD694AR的Datasheet PDF文件第3页浏览型号AD694AR的Datasheet PDF文件第4页浏览型号AD694AR的Datasheet PDF文件第5页浏览型号AD694AR的Datasheet PDF文件第6页浏览型号AD694AR的Datasheet PDF文件第7页浏览型号AD694AR的Datasheet PDF文件第8页浏览型号AD694AR的Datasheet PDF文件第9页  
a
FEATURES
4–20 mA, 0–20 mA Output Ranges
Precalibrated Input Ranges:
0 V to 2 V, 0 V to 10 V
Precision Voltage Reference
Programmable to 2.000 V or 10.000 V
Single or Dual Supply Operation
Wide Power Supply Range: +4.5 V to +36 V
Wide Output Compliance
Input Buffer Amplifier
Open-Loop Alarm
Optional External Pass Transistor to Reduce
Self-Heating Errors
0.002% typ Nonlinearity
4–20 mA Transmitter
AD694*
FUNCTIONAL BLOCK DIAGRAM
PRODUCT DESCRIPTION
PRODUCT HIGHLIGHTS
The AD694 is a monolithic current transmitter that accepts
high level signal inputs to drive a standard 4–20 mA current
loop for the control of valves, actuators, and other devices com-
monly used in process control. The input signal is buffered by
an input amplifier that can be used to scale the input signal or
buffer the output from a current mode DAC. Precalibrated in-
put spans of 0 V to 2 V and 0 V to 10 V are selected by simple
pin strapping; other spans may be programmed with external
resistor.
The output stage compliance extends to within 2 V of V
S
and its
special design allows the output voltage to extend below com-
mon in dual supply operation. An alarm warns of an open 4-to-
20 mA loop or noncompliance of the output stage.
Active laser trimming of the AD694’s thin film resistors results
in high levels of accuracy without the need for additional adjust-
ments and calibration. An external pass transistor may be used
with the AD694 to off-load power dissipation, extending the
temperature range of operation.
The AD694 is the ideal building block for systems requiring
noise immune 4–20 mA signal transmission to operate valves,
actuators, and other control devices, as well as for the transmis-
sion of process parameters such as pressure, temperature, or
flow. It is recommended as a replacement for discrete designs in
a variety of applications in industrial process control, factory
automation, and system monitoring.
The AD694 is available in hermetically sealed, 16-pin cerdip
and plastic SOIC, specified over the –40°C to +85°C industrial
temperature range, and in a 16-pin plastic DIP, specified over
the 0°C to +70°C temperature range.
*Protected by U.S. Patents: 30,586; 4,250,445; 4,857,862.
1. The AD694 is a complete voltage in to 4–20 mA out current
transmitter.
2. Pin programmable input ranges are pre-calibrated at 0 V to
2 V and 0 V to 10 V.
3. The input amplifier may be configured to buffer and scale the
input voltage, or to serve as an output amplifier for current
output DACs.
4. The output voltage compliance extends to within 2 V of the
positive supply and below common. When operated with a
5 V supply, the output voltage compliance extends 30 V be-
low common.
5. The AD694 interfaces directly to 8-, 10-, and 12-bit single
supply CMOS and bipolar DACs.
6. The 4 mA zero current may be switched on and off with a
TTL control pin, allowing 0–20 mA operation.
7. An open collector alarm warns of loop failure due to open
wires or noncompliance of the output stage.
8. A monitored output is provided to drive an external pass
transistor. The feature off-loads power dissipation to extend
the temperature range of operation and minimize self-heating
error.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703