5B37
Bandwidth, -3 dB
4 Hz
Output Rise Time, 10% to 90% Span
200 ms
Common-Mode Voltage (CMV)4
1500 V rms, maximum
±3 V, maximum
ANSI/IEEE C37.90.1-1989
Common Mode Rejection (CMR)
160 dB
Input-to-Output, Continuous
Output-to-Power, Continuous
Transient
1 kΩ Source Imbalance, 50/60 Hz
Normal Mode Rejection (NMR), 50/60 Hz
60 dB
Input Protection
240 V rms, maximum
ANSI/IEEE C37.90.1-1989
50 Ω
Continuous
Transient
Output Resistance
Voltage Output Protection
Output Selection Time
Continuous Short to Ground
6 µs @ Cload = 0 to 2,000 pF
Output Enable Control
+1 V
Max Logic "0"
Min Logic "1"
+2.5 V
Max Logic "1"
+36 V
Input Current "0"
0.4 mA
Open Input Response
Open Input Response Time
Power Supply Voltage
Power Supply Current
Power Supply Sensitivity, RTI
Mechanical Dimensions
Upscale
10 seconds
+5 V ±5%
30 mA
±2 µV/% of Vs
2.275" x 2.375" x 0.595"
(57.8 mm x 59.1 mm x 15.1 mm)
Environmental
Temperature Range
Rated Performance
Operating
-25°C to +85°C
-40°C to +85°C
Storage
-40°C to +85°C
Relative Humidity
RFI Susceptibility
0 to 93% @ +40°C noncondensing
±0.5% Span error @ 400 MHz, 5 Watt, 3 ft
1Vz is the nominal input voltage that results in a 0 V output.
2Includes the combined effects of repeatability, hysteresis, and nonlinearity and assumes RL > 50 kΩ. Loads heavier than 50 kΩ will degrade nonlinearity and gain temperature
coefficient.
3When used with the model AC1361 CJC sensor (see Accessories section), which is provided on each channel of 5B Series backplanes and mounting cards.
4The output common must be kept within ±3 V of power common.
Specifications subject to change without notice.
Rev. 0 | Page 4 of 8