AD713
ABSOLUTE MAXIMUM RATINGS1, 2
ORDERING GUIDE
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Temperature
Range
Package
Description
Package
Option1
Internal Power Dissipation2
Model
Input Voltage3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Output Short-Circuit Duration
AD713AQ
AD713BQ
AD713JN
AD713JR-16
AD713JR-16-REEL
–40°C to +85°C
–40°C to +85°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
14-Pin Ceramic DIP Q-14
14-Pin Ceramic DIP Q-14
(For One Amplifier) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . +VS and –VS
Storage Temperature Range (Q) . . . . . . . . . . –65°C to +150°C
Storage Temperature Range (N, R) . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD713J/K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
AD713A/B . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD713S/T . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . . 300°C
14-Pin Plastic DIP
N-14
16-Pin Plastic SOIC R-16
16-Pin Plastic SOIC R-16
16-Pin Plastic SOIC R-16
AD713JR-16-REEL7 0°C to 70°C
AD713KN
0°C to 70°C
14-Pin Plastic DIP
N-14
AD713SQ2
–55°C to +125°C 14-Pin Ceramic DIP Q-14
–55°C to +125°C 14-Pin Ceramic DIP Q-14
–55°C to +125°C 14-Pin Ceramic DIP Q-14
AD713TQ2
5962-9063301MCA
5962-9063302MCA2 –55°C to +125°C 14-Pin Ceramic DIP Q-14
1N = Plastic DIP; Q = Cerdip; R = Small Outline IC (SOIC).
NOTES
2Not for new designs. Obsolete April 2002.
1Stresses above those listed under “Absolute Maximum Ratings” may cause perma-
nent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Thermal Characteristics:
14-Pin Plastic Package:
14-Pin Cerdip Package:
θ
θ
JC = 30°C/Watt; θJA = 100°C/Watt
JC = 30°C/Watt; θJA = 110°C/Watt
16-Pin SOIC Package:
θJC = 30°C/
Watt; θJA = 100°C/Watt
3For supply voltages less than 18 V, the absolute maximum input voltage is equal
to the supply voltage.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD713 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–3–