AD587
ABSOLUTE MAXIMUM RATINGS*
PIN CONFIGURATION
+VIN to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Power Dissipation (25∞C) . . . . . . . . . . . . . . . . . . . . . 500 mW
Storage Temperature . . . . . . . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . . 300∞C
Package Thermal Resistance
NOISE
*
1
2
3
4
8
7
6
5
TP
+V
REDUCTION
*
TP
IN
AD587
TOP VIEW
(Not to Scale)
*
V
OUT
TP
GND
TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22∞C/W
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110∞C/W
JC
JA
*
TP DENOTES FACTORYTEST POINT.
NO CONNECTIONS SHOULD BE MADE
TOTHESE PINS.
Output Protection: Output safe for indefinite short to ground
and momentary short to +VIN.
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD587 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. E
–3–