AD846
AD846A
Min Typ Max
AD846B
Min Typ Max
AD846S
Min Typ Max
Model
Conditions
Units
DIFFERENTIAL GAIN
F = 4.4 MHz, RL = 100 Ω
0.01
0.01
0.01
%
DIFFERENTIAL PHASE
F = 4.4 MHz, RL = 100 Ω
0.028
0.028
0.028
Degrees
POWER SUPPLY
Rated Performance
Operating Range
15
15
15
V
V
5
ꢃ18
5
ꢃ18
ꢃ5
ꢃ18
Quiescent Current
TRANSISTOR COUNT
NOTES
TMIN –TMAX
5
6.5
5
6.5
5
7
mA
72
72
72
1Input Offset Voltage Specifications are guaranteed after 5 minutes at TA = +25°C.
2Test Conditions: +VS = 15 V, –VS = 5 V to 18 V and +VS = 5 V to 18 V, –VS = 15 V.
3Bias Current Specifications are guaranteed maximum after 5 minutes at TA = +25°C.
4FPBW = Slew Rate/2 π VPEAK
.
5Total Harmonic Distortion.
All min and max specifications are guaranteed. Specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are
used to calculate outgoing quality levels.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal Power Dissipation2
Plastic Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 W
Cerdip Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 W
Common-Mode Input Voltage, Max Safe . . . . . . . |VS| – 3 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . .
Continuous Input Current
Inverting or Noninverting . . . . . . . . . . . . . . . . . . . . 2.0 mA
Storage Temperature Range (Q) . . . . . . . . . –65°C to +150°C
Storage Temperature Range (N) . . . . . . . . . –65°C to +125°C
Storage Temperature Range (R) . . . . . . . . . –65°C to +125°C
Operating Temperature Range
ORDERING GUIDE
Temperature Range
18 V
Package
Option2
Model1
AD846AN
AD846BN
AD846AQ
AD846BQ
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
N-8
N-8
Q-8
Q-8
Q-8
Q-8
Q-8
R-16
R-16
1 V
AD846SQ
AD846SQ/883B
5962-8964601PA
AD846AR-16
AD846AR-16-REEL –40°C to +85°C
NOTES
AD846A/B . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD846S . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . +300°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500 V
1“A” and “S” grade chips are also available.
2N = Plastic DIP Package; Q = Cerdip Package, R = SOIC Package
METALIZATION PHOTOGRAPH
Dimensions shown in inches and (mm).
Consult factory for latest dimensions.
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; the functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Maximum internal power dissipation is specified so that TJ does not exceed
+175°C at an ambient temperature of +25°C, derate cerdip (Q) package at
8.7 mW/°C and plastic (N) package at 10 mW/°C.
Plastic Package: θJA = 100°C/Watt, θJC = 33°C/W.
Cerdip Package: θJA = 110°C/Watt, θJC = 30°C/W.
SOIC Package: θJA = 100°C/Watt, θJC = 33°C/W.
–3–
REV. C