PAC5255
Power Application Controller
12.3. Functional Description
The Application Specific Power Drivers (ASPD, Figure 12-1) module handles power driving for power control
applications. The ASPD has six low-side gate drivers (DRLx), three ultra-high-voltage high-side gate drivers (DXHx), two
medium-voltage open-drain drivers (OMx) and a low-speed clock output/5V external driver enable signal
(CLKOUT/ENHS2). Each gate driver can drive an external MOSFET or IGBT switch in response to high-speed control
signals from the micro-controller ports, and a pair of high-side and low-side gate drivers can form a half-bridge driver. The
open-drain drivers provide activation control for relays, LEDs, buffers, and other loads.
Figure 12-2 below shows typical gate driver connections and Table 21 shows the ASPD resources available on PAC5255.
- 41 -
Rev 1.10‒March 3, 2018