PAC5220
Power Application Controller
1. GENERAL DESCRIPTION
The PAC5220 belongs to Active-Semi's broad portfolio of full-featured Power Application ControllerTM (PAC)
products that are highly optimized for controlling and powering next generation smart energy appliances,
devices, and equipment. These application controllers integrate a 50MHz ARM® CortexTM-M0 32-bit
microcontroller core with Active-Semi's proprietary and patent-pending Multi-Mode Power ManagerTM,
Configurable Analog Front EndTM, and Application Specific Power DriversTM to form the most compact
microcontroller-based power and general purpose application systems ranging from digital power supply to
motor control. The PAC5220 microcontroller features up to 32kB of embedded FLASH and 8kB of SRAM
memory, a high-speed 10-bit 1µs analog-to-digital converter (ADC) with dual auto-sampling sequencers,
5V/3.3V I/Os, flexible clock sources, timers, a versatile 14-channel PWM engine, and several serial interfaces.
The Multi-Mode Power Manager (MMPM) provides “all-in-one” efficient power management solution for multiple
types of power sources. It features a configurable multi-mode switching supply controller capable of operating in
buck, flyback, or boost mode, and up to four linear regulated voltage supplies. The Application Specific Power
Drivers (ASPD) are high-voltage power drivers designed for each target set of control applications, including half
bridge, H-bridge, 3-phase, intelligent power module (IPM), and general purpose driving. The Configurable
Analog Front End (CAFE) comprises differential programmable gain amplifiers, single-ended programmable
gain amplifiers, comparators, digital-to-analog converters, and I/Os for programmable and inter-connectible
signal sampling, feedback amplification, and sensor monitoring of multiple analog input signals. Together, these
modules and microcontroller enable a wide range of compact applications with highly integrated power
management, driving, feedback, and control for DC supply up to 52V and for line AC supply.
Figure 1-1. Power Application Controller
PWM ENGINE
MULTI-MODE
SERIAL
INTERFACE
POWER MANAGER
4 16-bit timers,
14 channels,
AC/DC, DC/DC,
linear regulators
SPI, I22C, UART
HW dead-time control,
10ns resolution control
APPLICATION
SPECIFIC POWER
DRIVERS
50MHz ARM CORTEX-M0
MICROCONTROLLER CORE & MEMORY
1-cycle 32-bit multiplier,
24-bit RTC, 24-bit WDT, 24-bit SysTick, NVIC,
FLASH & SRAM
High-side & low-side
gate drivers,
open-drain drivers
CONFIGURABLE ANALOG FRONT END
DATA ACQUISITION
& SEQUENCER
3 Differential PGAs,
4 Single-ended PGAs,
10 Comparators,
2 DACs (10-bit & 8-bit),
Temperature monitor
10-bit 1µs ADC,
dual auto-sampling
sequencer
The PAC5220 is available in a 56-pin, 8mmx8mm TQFN package. The PAC family includes a range of part
numbers optimized to work with different targeted primary applications.
- 7 -
Rev 1.11‒June 15, 2017
ACTIVE-SEMI [ ACTIVE-SEMI, INC ]
