ACT366
TYPICAL APPLICATION CONT’D
the input capacitor ground lead, and the ACT366 G
pin to a single point (star ground configuration).
Rev 1, 14-Nov-12
V
FB
Sampling Waveforms
ACT366 senses the output voltage information
through the V
FB
waveforms. Proper V
FB
waveforms
are required for IC to operate in a stable status. To
avoid mis-sampling, 1.0µs blanking time is added to
blank the ringing period due to the leakage
inductance and the circuit parasitic capacitance.
Figure 2 is the recommended V
FB
waveform to
guarantee the correct sampling point so that the
output information can be sent back into the IC to
do the appropriate control.
Figure 2:
1.0µs
Innovative Power
TM
-8-
www.active-semi.com
Copyright © 2012 Active-Semi, Inc.