欢迎访问ic37.com |
会员登录 免费注册
发布采购

ACT2803QJ-T 参数 Datasheet PDF下载

ACT2803QJ-T图片预览
型号: ACT2803QJ-T
PDF下载: 下载PDF文件 查看货源
内容描述: [5V/2.4A Dual Cell Battery Power Manager]
分类和应用: 电池
文件页数/大小: 22 页 / 523 K
品牌: ACTIVE-SEMI [ ACTIVE-SEMI, INC ]
 浏览型号ACT2803QJ-T的Datasheet PDF文件第1页浏览型号ACT2803QJ-T的Datasheet PDF文件第2页浏览型号ACT2803QJ-T的Datasheet PDF文件第4页浏览型号ACT2803QJ-T的Datasheet PDF文件第5页浏览型号ACT2803QJ-T的Datasheet PDF文件第6页浏览型号ACT2803QJ-T的Datasheet PDF文件第7页浏览型号ACT2803QJ-T的Datasheet PDF文件第8页浏览型号ACT2803QJ-T的Datasheet PDF文件第9页  
ACT2803  
Rev 1, May-12-2016  
PIN DESCRIPTIONS  
PIN  
NAME  
DESCRIPTION  
1
CSN  
Output current sense negative input.  
Output current sense positive input.  
Power Output Pin.  
2,3  
4, 5  
6, 7  
CSP  
VOUT  
VIN  
USB or AC Adapter input.  
8
9
OVGATE Output to drive optional external NMOS protect IC from over voltage.  
OVSENS USB or AC Adapter input sense.  
10  
11  
SCL  
SDA  
I2C clock input.  
I2C data input.  
Power ground. Directly connect this pin to IC thermal PAD and connect 22uF high quality  
capacitors from BAT to PGND on the same layer with IC.  
12  
PGND  
13  
HSB  
SW  
High side bias pin. Connect a 47nF ceramic capacitor from HSB to SW.  
Internal switch connected to a terminal of the output inductor.  
14,15  
16,17  
BAT connection. Connect it to battery current sense positive terminal. Bypass to PGND with high  
quality ceramic capacitors placed as close to the IC as possible.  
BAT  
Battery charge current sense input. Connect to charge sense resistor positive terminal with  
Kevin sense.  
18  
BATS  
19  
20  
21  
22  
BATP  
BATC  
CBD  
Connect to charge sense resistor negative terminal and battery positive terminal.  
Battery central point connection. Connect to dual battery cell common terminal.  
Cell balancing discharge. Connect to a discharge resistor from this pin to battery common  
terminal.  
BATN  
Battery negative terminal.  
Fast charge current setting pin. Connect a resistor from this pin to AGND to set the charging  
current. The current setting ranges from 0.5A-1.8A. The voltage at this pin reflects the charge  
current and discharge current in charge mode and discharge mode, respectively.  
23  
24  
25  
ICST  
TH  
Temperature sensing input. Connect to a battery thermistor terminal.  
+5V Bias output. Connect a 1.0uF to this pin. This pin supplies up to 50mA output current. The  
bias turns on in charge mode and discharge mode. Internal register bit can shut down the bias.  
Bias turns off in HZ mode.  
VREG  
26  
27  
AGND  
PB  
Logic ground output. Connect this pin to the exposed PGND pad on same layer with IC.  
Push button input. When this pin is pushed for more than 40ms, LED1-4 indicators are enabled  
for 5 seconds.  
28  
LED1  
Battery level indicator.  
Innovative PowerTM  
- 3 -  
www.active-semi.com  
Copyright © 2016 Active-Semi, Inc.