Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
5-2. Electronic Characteristics ( TA = 25°C )
Characteristic
Minimum
Typical
866.000
19
Maximum
Unit
MHz
MHz
MHz
Centre Frequency
3dB Bandwidth
Usable Passband
Insertion Loss
fC
―
―
―
―
―
―
BW3
BW
IL
±4.0
within fC ± 4.0 MHz
―
―
3.0
1.2
4.5
2.0
dB
dB
Amplitude Ripple (p-p)
within fC ± 4.0 MHz
Δα
α
Absolute Attenuation
fC 400.0
~
~
fC 30.0 MHz
fC 400.0 MHz
42
40
52
48
―
―
dB
dB
fC 50.0
Terminating Impedance
50Ω // 10nH
LCAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
NOTE:
1. The frequency fC is defined as the midpoint between the 3dB frequencies.
2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss
at the filter centre frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the
impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence
without notice.
5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue : 2 C1u
Date : SEPT 06