Grease & Epoxy
Sil-FreeTM
Sil-FreeTM 1020 is a metal-oxide-filled, silicone-free synthetic grease
specially formulated to enhance heat transfer across the interface
between the semiconductor case and the heat sink without the
migration or contamination associated with silicone-based products.
PRODUCT INFORMATION
Color
White
Thermal
0.79 W/(m-°C)
conductivity
Operating
temperature range
-40°C to +200°C
Dry interface case-to-sink thermal resistance is typically reduced
50% to 75% with proper application of Sil-FreeTM 1020.
Volume
1012 Ohm-cm 2.3 0.5
47.5 grams
This virtually "no-bleed", high-performance compound will not dry
out, harden, melt, or run, even after long-term continuous exposure
to temperatures up to 200°C. Even in a vacuum atmosphere (10-5
Torr, 24 hours@100°C), Sil-FreeTM 1020 exhibits virtually "no bleed"
or evaporation.
Weight
Dielectric strength
Consistency
Bleed
225 volts/mil
Paste
0.09 max
% after 24hr @ 200°C
Specific gravity
Shelf life
2.8 0.2
Indefinite
ORDERING INFORMATION
(unopened)*
Part number
Package
Syringe
Tube
Jar
Size
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing
101700F00000G
101800F00000G
101900F00000G
102000F00000G
102100F00000G
43 grams (1.5 oz)
57 grams (2.0 oz)
57 grams (2.0 oz)
143 grams (5.0 oz)
457 grams (16.0 oz)
Tube
Jar
Ther-O-LinkTM
Ther-O-LinkTM is a silicone-based thermal compound that
cost effectively enhances the heat transfer between a semi-
conductor case and a heat sink. Easy to apply, Ther-O-LinkTM
substantially reduces dry interface thermal resistance, while
providing long life under a variety of conditions.
PRODUCT INFORMATION
Color
White
Thermal conductivity 0.73 W/(m-°C)
Operating
-40°C to +200°C
temperature range
Volume resistivity
Dielectric strength
Consistency
Bleed
1.0 x 1015 Ohm-cm
250 volts/mil
Paste
ORDERING INFORMATION
Part number
Package
Ampule
Syringe
Tube
Size
100000F00000G
100100F00000G
100200F00000G
100500F00000G
100800F00000G
101600F00000G
108000F00000G
132000F00000G
1 gram (0.03 oz)
35.7 grams (1.25 oz)
57 grams (2.0 oz)
143 grams (5.0 oz)
228.6 grams (8.0 oz)
0.45 kg (1 lb)
0.6 max
Specific gravity
Shelf life
2.8
Indefinite (unopened)*
Tube
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing
Tube
Can
Can
2.27 kg (5 lb)
Can
9.07 kg (20 lb)
UltrastickTM
Aavid's UltrastickTM is a unique phase-change thermal inter-
face material that surpasses grease in thermal performance
and long-term stability. This solid, silicone-free, paraffin-
based thermal compound changes phase at 60°C, with a
concurrent volumetric expansion that fills gaps between the
mating surfaces. UltrastickTM comes in a convenient applica-
tor bar, allowing for neat, fast application to both heat sink
and component surfaces. One cost-effective application
leaves a thin, film-like deposit, providing excellent heat
transfer and low interface thermal resistance.
PRODUCT INFORMATION
Temperature range
Volume resistivity
Dielectric strength
Consistency
-40°C to +200°C
1.0 X 1.015 Ohm-cm
250 volts/mil
Paste
Bleed
0.6 max
Specific gravity
Color
0.28
Opaque White
Thermal resistance
0.03°C/W per square inch @ 20 psi
0.02°C/W per square inch @ 100 psi
Shelf life
Indefinite*
ORDERING INFORMATION
* Recommended max. storage temperature: 40ºC (105ºF)
Part number
Package
Size
100300F00000G
Bar
47.5 grams (0.16 oz)
USA Tel: +1 (603) 224-9988 email: info@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886 (2) 2698-9888 email: sales@aavid.com.tw
AMERICA
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
112
www.aavidthermalloy.com