Interface Material / Double Sided Tape
Double-sided thermal tapes adhere the heat sink to the device and offer
good thermal characteristics. They are easy to apply, require no curing time,
can be electrically conductive or isolating, and need no mechanical support
to provide thermal or physical contact between the device and the heat sink.
Aavid can apply one side to a heat sink.
ORDERING INFORMATION
example 12 digit part 375224B000 _ _G
Ordering code
Ordering code
Tape option
31
32
33
34
35
T414
T405R
T412
T410R
T411
T414 for ceramic or metal packages
T405R for ceramic or metal packages
Uses a 0.001 inch (0.03 mm) Kapton MTTM filled polymide
film coated on both sides with high-bond strength, pressure-
sensitive acrylic adhesive that is loaded with aluminum oxide
particles. This provides both good thermal performance and
excellent electrical isolation.
Uses a 0.002 inch (0.05 mm) aluminum foil core coated on both sides
with high-bond strength, pressure-sensitive acrylic adhesive that is
loaded with aluminum oxide particles. The aluminum foil provides
added thermal conductivity for applications where electrical isolation
is not required. The combination of filter, expanded metal and embossed
surface enhances both tape conformability and thermal performance.
Color
Beige
Color
White
Electrical function
Thickness
Insulating
Electrical function
Thickness
Conductive
0.006 (0.015)
Aluminum
0.54 °C-in2/w
0.50 w/m-k
N/A
0.127 mm (0.005)
Kapton MTTM
0.60 °C-in2/w
0.37 w/m-k
5000 VAC
Carrier
Carrier
Thermal impedance
Thermal conductivity
Breakdown voltage
Volume resistivity
Lap shear adhesion
Thermal impedance
Thermal conductivity
Breakdown voltage
Volume resistivity
UL flammability
Rating
5 x 1015 Ohm-cm
3 x 10-2 Ohm-cm
94V-0
125 (0.862) psi
Die shear adhesion
Aluminum 25°C
Aluminum 150°C
U.L.94
150 psi
15 psi
Lap shear adhesion
134 psi
Die shear adhesion
Aluminum 25°C
Aluminum 150°C
Alum.oxide 25°C
Alum.oxide 150°C
Creep adhesion
25°C @ 12psi
150°C @ 12psi
125 psi
55 psi
>50 days
>10 days
145 psi
60 psi
Creep adhesion
25°C @ 12 psi
150°C @ 12 psi
>50 days
>50 days
T412 for ceramic or metal packages
T410R / T411 for plastic packages
Uses an expanded foil carrier coated on both sides with
high-bond strength, pressure sensitive acrylic that is
loaded with titanium diboride particles. The combination
of filter, expanded metal and embossed surface enhances
both tape conformability and thermal performance.
T410R thermally conductive tape consists of a high bond strength,
pressure sensitive acrylic adhesive loaded with aluminum oxide and
coated onto a 0.002 inch (0.05mm) aluminum foil carrier. The other
side of the foil carrier has a silicone pressure sensitive adhesive which
provides excellent adhesion to silicone-contaminated plastics and
other low energy surfaces.
T411 thermally conductive tape consists of a high bond strength,
pressure sensitive adhesive with an aluminum mesh carrier layer. The
mesh carrier allows the tape to conform to curved surfaces of plastic
molded IC packages, providing a high adhesive strength attachment
for heat sinks. The high performance silicone PSA allows adhesion to
silicone-contaminated plastics and other low energy surfaces.
Color
Grey
Electrical function
Thickness
Conductive
0.009 (0.23 )
Expanded aluminum
0.25 °C-in2/w
1.40 w/m-k
N/A
Carrier
Thermal impedance
Thermal conductivity
Breakdown voltage
Volume resistivity
UL flammability
Lap shear adhesion
Typical properties
T410R
Acrylic
T411
N/A
Construction
Silicone
Adhesive (to heat sink side)
N/A
Color
White
Clear (silver)
Aluminum mesh
Silicone
70 psi
Carrier
Aluminum foil
Silicone
Die shear adhesion
Aluminum 25°C
Aluminum 150°C
Alum.oxide 25°C
Alum.oxide 150°C
135 psi
25 psi
Adhesive (onto component side)
Color (to component side)
Thickness, mm (inch)
Clear (Silver)
0.18 (0.007)
Clear (Silver)
0.28 (0.011)
125 psi
40 psi
Thermal impedance @<1 psi °C-cm2/w (°C-in2/w)
Operating temperature range, °C
7.1 (1.1)
6.5 (1.0)
Creep adhesion
25°C @ 12 psi
150°C @ 12 psi
-50 to + 150
-50 to + 150
>50 days
>10 days
Lap shear adhesion, psi (MPa)
60 (0.414)
14 (0.094)
Die shear adhesion, psi (MPa) steel/FR4
25°C
125 °C
170 (1.172)
40 (0.276)
80 (0.552)
20 (0.138)
Note: Double Sided Tapes are factory applied only.
USA Tel: +1 (603) 224-9988 email: info@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886 (2) 2698-9888 email: sales@aavid.com.tw
AMERICA
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
88
www.aavidthermalloy.com