Grease & Epoxy
ThermalcoteTM
ThermalcoteTM is a superior thermal joint compound of ther-
mally loaded silicone based grease for use with all heat sinks.
It improves the transfer of thermal energy across the metal
to metal interfaces between the transistor or rectifier case
and the heat sink. ThermalcoteTM conducts heat approximately
15 times better than air and more than 4 times better than
unloaded silicone grease. It is non-toxic, extremely stable,
and neither cakes or runs from -40° to 204°C (-40°F to 399°F).
PRODUCT INFORMATION
Color
Opaque white
Operating
temperature range
-40°C to 204°C (-40°F to 399°F)
Thermal conductivity
Dielectric strength
0.765W/(m °C )(.226 Btu/hr ft °F)
11.8 x 103 volts/mm (300 volts/mil)
1.27 mm gap (0.050" gap)
Cleaning solvent
Specific gravity
Mineral spirits or turpentine
1.6
Evaporation
24 hours@200°C (392°F), wt%
1
Shelf life
Indefinite (unopened)*
ORDERING INFORMATION
Part number
249G
Net weight
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing
28 grams (1 oz) tube
57 grams (2 oz) tube
0.45 kg (1 lb) can
2.27kg (5 lb) can
4.54 kg(10 lb) can
250G
251G
252G
253G
ThermalcoteTM ll
PRODUCT INFORMATION
Thermalcote™ II was developed as the sensible alternative
to silicone-based thermal greases. ThermalcoteTM II employs
a highly conductive synthetic base fluid that enables the
finished product to exhibit the same thermal characteris-
tics as the silicone-based products.
Color
Blue
Operating
-40°C to 200°C (-40°F to 392°F)
temperature range
Thermal conductivity
Dielectric strength
0.699W/(M °C) (0.204 Btu/hr ft °F)
Thermalcote™ II contains no silicone. The high lubricity of
the base oil permits efficient application to both semicon-
ductor case or heat sink, and it will effectively fill the micro-
scopic air gaps on the metal-to-metal mating surfaces. It is
non-toxic, extremely stable, and neither cakes or runs from
-40° to 200°C (-40°F to 392°F).
7.9 x 103volts/mm (200volts/mil)
1.27 mm gap (0.050" gap)
Cleaning solvent
Specific gravity
Evaporation,
Mineral spirits or turpentine
2.93@60°F (15.6°C)
24 hours@200°C (392°F), wt% 0.6 max
Shelf life
Indefinite (unopened)*
ORDERING INFORMATION
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing
Part number
349G
Net weight
28 grams (1 oz) tube
57 grams (2 oz) jar
0.45 kg (1 lb) can
350G
351G
USA Tel: +1 (603) 224-9988 email: info@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886 (2) 2698-9888 email: sales@aavid.com.tw
AMERICA
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
113
www.aavidthermalloy.com
AAVID [ AAVID THERMALLOY, LLC ]
