A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Power White Surface Mount Device
Part Number: 61-24UWC
Package outlines & Re-flow Profile
Reflow Temp/Time
Soldering iron
Basic spec is U 5sec when 260℃. If temperature is higher,
time should be shorter (+10℃Æ -1sec ).Power dissipation
of iron should be smaller than 15W, and temperatures
should be controllable .Surface temperature of the device
should be under 230℃ .
ITEM
MATERIALS
Epoxy
Resin (mold)
Lens color
Yellow Diffused
Printed circuit board
BT
White
Emitted color
Material
For reflow soldering (Propose)
InGaN
NOTES:
1. All dimensions are in millimeters (inches);
2. Tolerances are ±0.1mm (0.004inch) unless otherwise
noted.
3. Polarity referring onto the cathode mark is reversed on the
red.