LMV321B/LMV358B/LMV324B
1MHz, 80μA, RRIO, Op Amps
Absolute Maximum Ratings Note 1
Parameters
Rating
Supply Voltage, (+VS)– (-VS)
Input Voltage
6 V
(-VS) – 0.3 to (+VS) + 0.3
±6V
Differential Input Voltage
Input Current: +IN, –IN Note 2
Output Short-Circuit Duration Note 3
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 10 sec)
±10mA
Infinite
150°C
–40 to 125°C
–65 to 150°C
260°C
Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to
any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.
Note 2: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 300mV beyond the
power supply, the input current should be limited to less than 10mA.
Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power
supply voltage and how many amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the
package. The specified values are for short traces connected to the leads.
ESD Rating
Symbol
HBM
Parameter
Condition
Minimum Level
Unit
kV
Human Body Model ESD
Charged Device Model ESD
ANSI/ESDA/JEDEC JS-001
ANSI/ESDA/JEDEC JS-002
8
2
CDM
kV
Thermal Information
Package Type
θJA
θJC
Unit
5-Pin SC70
400
250
158
191
210
120
180
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
5-Pin SOT23
8-Pin SOIC
81
43
44
45
36
35
8-Pin TSSOP
8-Pin MSOP
14-Pin SOIC
14-Pin TSSOP
www.3peakic.com.cn
Rev.0
4 / 16
3PEAK [ 3PEAK ]
