3M™ Latch/Eject Header
2 mm x 2 mm Straight & RightAngle, Through-Hole, Straight, Surface Mount
1552 Series
•ꢀ 14 pin counts ranging from 6 to 50 positions
•ꢀ Latch/eject mechanism maintains a secure
connection
•ꢀ Roll pins retain latches to body in shipping and high
vibration environments
•ꢀ Ejector helps make removal of assemblies easy
•ꢀ Latch design helps resist breakage during eject
•ꢀ High temperature insulators suitable for “lead free”
processing and meet JEDEC J-STD-020C
•ꢀ Robust system solution when used with 3M™ IDC
Wiremount Sockets or 3M™ Molded Cable
Assemblies
•ꢀ SMT latch/eject headers are available in tape and reel
with vacuum cap for automatic placement. Latch
option 2 and 3.
•ꢀ See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: September 16, 2008
TS-2199-F
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Black
Contact:
Material: CopperAlloy
Plating:
Underplating: 50 μ" [ 1.27 μm ] Nickel
WipingArea: See Ordering Information
Solder Tails: 200 μ" [ 5.0 μm ] Matte Tin
Electrical
1A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
> 1 × 109 Ω at 500VDC
1,000VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
Maximum 260°C (per J-STD-020C)
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/