3M
™
Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital Data Transmission System - 26 Position
14X26-SZLB-XXX-0LC
• Supports Industrial CameraLink
™
in Automated
Imaging Association for camera to frame grabber
communications
• 11 shielded twin-ax pairs and four drain wires
• Entire cable bundle is shielded with foil and braid for
additional signal protection
• Rugged MDR ribbon type contact
• Rugged thumbscrew retention
• EMI shielded junction shell in either plastic or
overmolded construction
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnector.com for compliance information
(RIA E1 & C1 apply)
Date Modified: May 18, 2011
TS-1001-C
Sheet 1 of 4
Physical
Connector Contact Plating
Wiping Area: 30 µ” [ 0.76 µm ] Min. Gold
Shell Color: Beige
Shell Material: Overmold Option: Polyvinyl Chloride (PVC);
Shell Kit Option: Polyester Elastomer
Cable Color: Beige
Cable Jacket Material: Polyvinyl Chloride (PVC)
Cable Flammability: AWM VW-1
Electrical
Voltage Rating:
30 V
Current Rating:
1 A
Insulation Resistance:
> 1 × 10
8
Ω
at @100 V
DC
Withstanding Voltage:
350 V
rms
for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
Conductor Size:
Propogation Velocity:
Skew (within pair):
Skew (channel skew per chipset):
100 ± 10Ω
28 AWG Stranded
1.25 ns/ft [4.1 ns/m ]
50 ps/meter maximum
50 ps/meter maximum
Environmental
Temperature Rating:
-20°C to +75°C
UL File No.: E86982
CameraLink is a trademark of the Automated Imaging Association.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M [ 3M ELECTRONICS ]
