3M
™
Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Camera Link
®
Cable – Right Angle
14H26-SZLX-XXX-0LC
• Supports Industrial Camera Link
®
standard for camera to
frame grabber communications
• Space-saving right angle cable exit
• 11 shielded twin-ax pairs and four drain wires
• Entire cable bundle is shielded with foil and braid for
additional signal protection
• Rugged MDR ribbon type contact
• Rugged thumbscrew retention
• EMI shielded junction shell on straight end
• EMI shielded overmolded shell on right-angle end
• See Regulatory Information Appendix (RIA) for chemical
compliance information
Date Modified: January 20, 2009
TS-2262-C
Sheet 1 of 3
Physical
Connector Contact Plating:
Wiping Area: 30 μ" [0.76 μm] Min. Gold (RIA E1 & C1 apply)
Overmolded Shell:
Color: Black
Material: Polyvinyl Chloride (PVC)
Shell:
Color: Beige
Material: Polyester Elastomer
Cable:
Color: Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating:
Current Rating:
Insulation Resistance:
Withstanding Voltage:
Individually Shielded Twisted Pairs
Characteristic Impedence:
Conductor Size:
Propagation Velocity:
Skew (within pair):
Skew (channel skew per chipset):
30 V
1A
> 1 x 10
8
Ω
at 100 V
DC
350 V
RMS
for 1 minute
100 ± 10
Ω
28 AWG Stranded
1.25 ns/ft [4.1 ns/m ]
50 ps/meter maximum
50 ps/meter maximum
Environmental
Temperature Rating:
-20°C to +75°C
UL File No.: E86982
Camera Link is a certification mark of Automated Imaging Association.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M [ 3M ELECTRONICS ]
