Adhesives
3M™ Structural Adhesives (cont.)
3M™ EPX™ Applicators & Accessories
Mixing nozzle will perform to your requirements. With consistent air
pressure for easy uniform application, the Duo-Pak cartridge will give
you the flow rate needed. Fast, convenient way to simultaneously
meter, mix and apply two-part adhesives and potting compounds.
System features handy Duo-Pak Adhesive Cartridges that snap
quickly into the durable, lightweight EPX applicator. A slight squeeze
on the trigger advances the plunger into the cartridge. Accurate
measurement and the mixing nozzle provides thorough mixing
and precise placement of material. Ideal system for assembly,
maintenance and in-field service.
189875
Product Number/Description
Size
UPC (021200-)
Qty./Case
3M™ EPX™ Metal Applicator #9470 with 2:1 Plunger
50mL
21789-0
10
3M™ EPX™ 50mL Pneumatic Applicator with 2:1 Plunger
3M™ EPX™ Plus II Applicator with 2:1 and 1:1 Plunger (manual)
3M™ EPX™ Plus II Square Gold Mixing Nozzle
50mL
50mL
127mm
50mL
—
83528-5
50004-6
97331-4
21791-3
82314-5
1
10
36
72
10
3M™ EPX™ Mixing Nozzle #9742 for 50ml applicator
3M™ EPX™ 2:1 Plunger Assembly for 50ml applicator
3M™ Scotch-Weld™ Instant Adhesive
For speed and performance, you’ll find a product with the
right combination of bond strength, cure time and viscosity.
Ave.
Time1 to
T-Peel2
at 75°F
(24°C)
(PIW)
Overlap Shear Strength3 at 75°F (24°C) (PSI)
Alumi- Nitrile Neoprene Rigid
Handling
Product Number/
Description
Strength Viscosity
(sec.)
Qty./
Steel num Rubber Rubber APS PVC Size UPC (021200-) Case
Base
(CPS)
3M™ Scotch-Weld™ Instant Adhesive CA40H
• Better void filling capabilities
• Good adhesion to aluminum, EPDM, rubber and flexible vinyl
• Good resistance to soap solutions and isopropyl alcohol
Ethyl
5–40
400–600
1–2
1500 1500
35*
55*
900* 1000* 1 oz.
21073-0
12
322427
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
1 The time it takes assembled parts to reach a strength where further handling and processing can take place. Times will depend on surface to be bonded, temperature
and humidity.
2 Tested per ASTM D1876-61T
3 Tested per ASTM D1002-64
* Substrate Failure
95
3M [ 3M ELECTRONICS ]
