Adhesives
3M™ Non-Structural Adhesives (cont.)
3M™ Scotch-Weld™ Plastic Adhesives: The Scotch-Weld™ Adhesive is a tool designed adhesive designed to provide innovative
answers to a wide variety of non-structural bonding problems.
Peel
Overlap Shear Strength
Flash
Strength (PSI)
(PSI)
Solids
Weight (Closed Consis- Dry
tency Film Method Range (24°C) (82°C) (24°C) Size UPC (021200-) Case
Point
Color Applic-
ation Bonding 75°F 180°F 75°F
Qty./
Product Number/Description (Approx.) Cup)
3M™ Scotch-Weld™ High Performance Plastic Adhesives
3M™ Scotch-Weld™ Nitrile High Performance Plastic Adhesive 1099
• Fast drying and heat curable
• Resists weathering, water, oil, plasticizer migration, aliphatic fuels
• Meets MIL-A-13883B, Type 1 and MMM-A-189C, Class 2
• A very strong plastic adhesive
• Bonds most plastic and vinyl
0°F
Medium Light Brush,
Up to
5 oz.
tube
32%
13061,2 6431,2
313
19808-3
22578-9
36
(-18°C) Liquid
Tan
Flow
40 min.
678935
3M™ Scotch-Weld™ Nitrile High Performance Plastic Adhesive 1099L
• Lower viscosity
• Sprayable version of 1099 Adhesive
0°F
Thin
Spray,
Brush 20 min.
Up to
5 gal.
pail
24%
Tan
13061,2 6431,2
313
1
(-18°C) Liquid
679850
3M™ Scotch-Weld™ Nitrile High Performance Industrial Plastic Adhesive 4693H
• Clear, elastomeric adhesive
• Exceptional adhesion to metal and plastic
• Unique in its ability to bond hard-to-hold materials like polypropylene, polyethylene and high impact polystyrene
1°F
Medium
Flow,
Up to
5 oz.
tube
36%
Clear
—
—
223
30088-2
36
(-17°C) Liquid
Brush 60 min.
676284
3M™ Scotch-Weld™ High Performance Rubber and Gasket Adhesives
3M™ Scotch-Weld™ Nitrile High Performance Rubber and Gasket Adhesive 847
• Quick drying and flexible with fuel and oil resistance
• Heat and solvent reactivatable
• Curable with heat
5 oz.
tube
19718-5
19721-5
36
12
0°F
Medium
Flow,
Up to
36%
Brown
2004
94
403
(-18°C) Liquid
Brush 15 min.
1
Quart
55587
3M™ Scotch-Weld™ Neoprene High Performance Rubber and Gasket Adhesive 1300
• High immediate strength
• Fast-drying and heat resistant for rubber and metal
-14°F Medium
Flow,
Up to
5 oz.
tube
37%
Yellow
5491
1364
523
19868-7
36
36
(-26°C) Liquid
Brush 12 min.
678931
3M™ Scotch-Weld™ Industrial Adhesive
3M™ Scotch-Weld™ Industrial Adhesive 4799
• Brushable paste consistency with low soak-in on porous surfaces
• Can bond EPDM rubber
-14°F
Thin
Brush,
Trowel 15 min.
Up to
5 oz.
tube
36%
Black
—
—
283
21354-0
(-26°C) Paste
678946
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
1 Aluminum to aluminum @ 0.1 inches/minute
2 Bonds heat cured for 15 minutes @ 324°F (162°C), 150 PSI
3 Canvas to cold rolled steel @ 2.0 inches/minute separation rate
4 Birch plywood to birch plywood @ 0.1 inches/minute separation rate
91
3M [ 3M ELECTRONICS ]
