Adhesives
3M™ Adhesive Selection Guide
Structural Adhesives: Each adhesive has high
cohesive strength to bond high strength materials
and potentially replace mechanical fasteners.
Non-Structural Adhesives
3M™ Scotch-Weld™
Epoxy, Acrylic
Adhesives
3M™ Scotch-Weld™
Instant Adhesives
3M™ Scotch-Weld™
Adhesives
3M™ Aerosol
Adhesives
Metal to:
Metal
Acrylics, Epoxies
—
CA40H
CA40H
CA40H
—
1357, 1099 (All), 1300
80, 90
—
EPDM Rubber
4799
1300, 847
1357
Rubber (except EPDM)
Glass and Ceramics
Flexible 2-part Epoxies
Flexible 2-part Epoxies
Flexible 2-part Epoxies
DP8005
80, 90*
80, 90
80
Leather
—
847
Plastics (Polyolefins)
—
—
90
Plastics (ABS, PVC, Acrylic, etc.)
Plastics (High Performance Nylon)
Plastics (Flexible Vinyl)
Paper and Cardboard
DP8005
CA40H
CA40H
CA40H
—
1357
77, 80, 90
77, 80, 90
80
DP460
1099 (All)
1099 (All)
10
Flexible 2-part Epoxies
2-part Epoxies
2-part Epoxies
—
77
Fabric, Felt, Cork and Fibrous Glass
Flexible Foam (Latex, Urethane)
Rigid Foam (Beadboard, Styrene)
Rigid Foam (Urethane)
—
—
74, 77, 80, 90
74, 90
—
—
—
Flexible 2-part Epoxies
Flexible 2-part Epoxies
—
—
CA40H
1357, 5, 10
74, 80
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Final product
selection should be made only after consideration of a variety of factors and evaluations of sample bonds.
*Produces a temporary bond on these materials. (1) Adhesives must be force dried and bonded while warm. (2) For best results, preheat the substrate to a minimum of
120°F (49°C). (3) Evaluate usage surface activator.
89
3M [ 3M ELECTRONICS ]
