90 Watts
xppower.com
AMM90 Series
•
•
•
•
•
•
•
CEC2008 & EISA2007 Compliant ≥12V
Worldwide Medical Approvals
Small Size/High Power Density
Class I and Class II Versions
Operating Temperature up to +60 °C
High Efficiency
Locking Output Connector ≥15 V
Specification
Input
General
Input Voltage
Input Frequency
Input Current
• 90-264 VAC
• 47-63 Hz
Efficiency
• 78% min for 5 V, 6 V & 9 V models
85% minimum for all others
Isolation
• 4000 VAC Input to Output
1500 VAC Input to Ground (Class I only)
500 VAC Output to Ground (Class I only)
• 1.2 A rms at 115 VAC,
0.6 A rms at 230 VAC
Inrush Current
Power Factor
• 60 A at 115 VAC, 120 A at 230 VAC,
cold start +25 °C
Switching Frequency
Power Density
MTBF
• 50-110 kHz variable
• 3.4 W/In3
• 0.98 typical
• 150 kHrs per MIL-HDBK-217F
Earth Leakage Current • 90 µA max at 115 VAC/60 Hz,
(Class I Versions)
150 µA max at 230 VAC/50 Hz
Environmental
Input Protection
• Internal 2.5 A fuse in live & neutral lines
Operating Temperature • 0 °C to +60 °C, derate from 100% power
Output
at +40 °C to 50% power at +60 °C
Cooling
• Convection-cooled
Output Voltage
• 5 to 48 VDC
Operating Humidity
Storage Temperature
Operating Altitude
Shock
• 10-95% RH, non-condensing
• -20 °C to +80 °C
Output Voltage Trim
Initial Set Accuracy
Minimum Load
• Not user-adjustable
•
2 %
• 3000 m
• No minimum load required
• 2 s max at 115 VAC
• <80 ms at 115 VAC
• 15 ms minimum at full load & 115 VAC
• 0.5% maximum
• 30 g, 10 ms on 3 axes
• 5-100 Hz, 2.31 m/s2, 20 mins, 3 axes
Start Up Delay
Vibration
Start Up Rise Time
Hold Up Time
EMC & Safety
Line Regulation
Load Regulation
Transient Response
Emissions
• EN55011/FCC/VCCI, Class B conducted
EN55011/FCC/VCCI, Class B radiated
• See table
• 4% max. deviation, recovery to within
1% in 500 µs for a 25% load change
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
• EN61000-3-2, Class A
• EN61000-3-3
Ripple & Noise
• 2% max pk-pk (see note 1)
• EN61000-4-2, level 3 Perf Criteria A
• EN61000-4-3, level 2 Perf Criteria A
• EN61000-4-4, level 3 Perf Criteria A
• EN61000-4-5, level 3 Perf Criteria A
• EN61000-4-6, 3 V Perf Criteria A
• EN61000-4-8, 3 A/m Perf Criteria A
Overvoltage Protection • 112-140% Vnom, recycle input to reset
Overtemperature
Protection
• Unit shuts down, auto recovery
Surge
Overload Protection
• 110-200%, auto recovery
Conducted Immunity
Magnetic Field
Dips & Interruptions
Short Circuit Protection • Trip and restart (Hiccup mode)
Temperature
Coefficient
• 0.04%/°C
T
• EN61000-4-11, 70% U for 10 ms,
T
T
40% U for 100 ms, <5% U for 5000 ms
Perf Criteria A, B, B (Perf Criteria A, A, B
with 70% load)
Safety Approvals
• EN60601-1, UL60601-1,
CSA22.2 No. 601-1 per cUL, CE Mark
XPPOWER [ XP POWER LIMITED ]
