Packaging Specification - Tape and Reel: [mm]
P0
D0
P2
T
W3
W1
close to center
B
C
top cover
tape
W2
A0
D1
K0 T1
T2
P1
Polarity Mark
Cathode
Carrier tape
End
Start
Feeding direction
Cover tape
No Component
min. 160mm
Components
No Component
min. 100mm
Cover Tape
min. 400mm
A
B
C
D
N
W1
W2
W3
W3
tolerance
Tape width
2,0
178,00
min.
1,50
0,8
13,00
min.
20,20
min.
50,00
+1,5
12,40
max.
18,40
min.
11,90
max.
15,40
packaging is reffered to the international standard IEC 60286-3:2013
12 mm
A0 B0
typ. typ. +0,3/ -0,1 typ. typ. typ. typ.
3535 3.80 3.80 12.00 0.25 0.10 3.05 2.80 4.00 8.00 2.00 1.50
W
T
T1 T2 K0 P0
P1 P2 D0
+0,1/ -0,0 typ. +0,1/ -0,0 min.
1.50 1.75 10.25 5.50 Polystyrene
D1 E1
E2
F
Tape Type 2a
VPE / packaging unit
pcs.
500
tolerance
size
0,1
CREATED
CHECKED
GENERAL TOLERANCE
PROJECTION
METHOD
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
KaS
ZAn
DIN ISO 2768-1m
Max-Eyth-Str. 1
74638 Waldenburg
Germany
165° - 180°
DESCRIPTION
WL-SIMW SMD Infrared Ceramic
Waterclear
Tel. +49 (0) 79 42 945 - 0
ORDER CODE
www.we-online.com
eiSos@we-online.com
15435385A9050
SIZE
REVISION
STATUS
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
Pull-of force
001.000
Valid
2015-11-10
eiPal
6/9
3535
12 mm
Tape width
0,1 N - 1,3 N
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.