WCS1500
Hall Effect Base Linear Current Sensor
Features:
Diameter 9.0mm conductor through hole
Output voltage proportional to AC and DC current
Wide sensing current range 0~200A at 5V volt.
High sensitivity11mV/A
Wide operating voltage range 3.0~12 V.
Low operating current 3mA
Isolation voltage 4000V
Ratiometric output from supply voltage
23K Hz Bandwidth
Two bronze sticks for easy soldering on PCB
Functional Description :
The Winson WCS1500 current sensor provides economical and precise
solution for both DC and AC current sensing in industrial, commercial and
communications systems. The unique package provodie easy implementation
without breaking original system and make current sensing possible. Typical
applications include motor control, load detection and management,
over-current fault detection and any intelligent power management system
etc…
The WCS1500 consists of a precise, low-temperature drift linear hall
sensor IC with temperature compensation circuit and a diameter 9.0mm
through hole. Users can use system’s own electric wire by pass it through this
hole to measure passing current. This design allow system designers to
monitor any current path without breaking or changing original system layout
at all. Any current flowing through this hole will generate a magnetic field
which is sensed by the integrated Hall IC and converted into a proportional
voltage.
The terminals of the conductive path are electrically isolated from the
sensor leads. This allow the WCS1500 current sensor to be used in
applications requiring electrical isolation without the use of opto-isolators or
other costly isolation techniques and make system more competitive in cost.
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2011/8/12
WINSON [ WINSON SEMICONDUCTOR CORP. ]
