SATCOM / "1 ppm Forever" TCXO
Performance Characteristics
Parameter
Characteristics
Output Options:
AC = ACMOS
HC = HCMOS
TD = 10 TTL
0.5 to 160 MHz
0.5 to 160 MHz
0.5 to 160 MHz
3.0 to 30 MHz
RG = 0 dBm 50 ohm
RC = +7.0 dBm 50 ohm 3.0 to 90 MHz
Stability Options:
(Other stability
options are available)
A17 = ± 0.1 ppm
B37 = ± 0.3 ppm
C57 = ± 0.5 ppm
D16 = ± 1.0 ppm
EA6 = ± 1.5 ppm
0˚C to +50˚C
0˚C to +70˚C
-20˚C to +70˚C
-40˚C to +85˚C
-55˚C to +85˚C
Supply Voltage:
(Other voltage
options are available)
AC = +12 Vdc ± 5%
HC = +12 Vdc ± 5%
TD = +12 Vdc ± 5%
RG = +5 Vdc ± 5%
RC = +12 Vdc ± 5%
-10
Allan Variance (typical):
± 1 x 10
at tau = 1 sec
st
Aging (at 10MHz):
"1 ppm Forever"
< 0.2 ppm / 1 year
< 0.7 ppm / 10 years
st
SATCOM
< 0.5 ppm / 1 year
< 2.0 ppm / 10 years
-110 dBc / Hz
-135 dBc / Hz
-150 dBc / Hz
-155 dbc / Hz
@ 10 Hz offset
@ 100 Hz offset
@ 1 kHz offset
@ 100 kHz offset
Phase Noise (typical):
10 MHz, RC option
(SATCOM) RCR7HYA17C 10.00 MHz
Typical P/N:
("1 ppm Forever") RGR5HXB37C 15.00 MHz
HY is predetermined, HX is for "1 ppm Forever" max temp range -20 to +70
Note: Not all stabilities are available with all options. Vectron International does not recommend wave
soldering, IR reflow or other elevated temperature processing without consulting the factory.
For AC, HC and TD outputs with frequencies above 30 MHz a low phase noise PLL multiplier will be used.
Please inform the factory of your phase noise requirements.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
2
VECTRON [ Vectron International, Inc ]
