The Standard ship method for volume production of the TC-210 series is in a matrix tray. These
trays are 100% recyclable. The trays also offer the added feature that they can be continuously
feed into a pick-n-place machine eliminating the down time required with tape-n-reel.
12 15/16
0. 215
0. 215
VI Logo
0. 12 5
4.00
0.1 25
1. 05
0. 125
0. 40 5 Deep
1. 20
0.15
3 x 9 Array / 27 units per tray
Although no industry-wide standard has been
adopted for the CDM, a standard HBM
(resistance = 1500 ohms, capacitance =
100pf) is widely used and therefore can be
used for comparison purposes. The HBM
ESD threshold presented here was obtained
by using these circuit parameters.
Although protection circuitry has been
designed into this device, proper precautions
should be taken to avoid exposure to
electrostatic discharge (ESD) during handling
and mounting. VI employs a human-body
model (HBM) and a charged-device model
(CDM) for ESD-susceptibility testing and
protection design evaluation. ESD voltage
thresholds are dependent on the circuit
parameters used to define the mode.
ESD Threshold Voltage
Threshold
500
Model
Unit
Human-Body (HBM)
Charged-Device
V min
V min
500
Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON
VECTRON [ Vectron International, Inc ]
