DC/DC Converters
TEL 15 Series
15 Watt
Physical Specifications
Casing material
Baseplate
copper nickel plated
non conductive FR4
epoxy (UL 94V-0 rated)
32 g (1.13 oz)
Potting material
Weight
Soldering temperature
max. 265°C / 10 sec.
Outline Dimensions
50.8
(2.0)
1 5.2
20.32
Pin-Out
Single
(0.6)
(0.8)
Pin
1
Dual
3
+Vin (Vcc)
+Vin (Vcc)
Bottom View
2
–Vin (GND) –Vin (GND)
1
2
4
3
+Vout
No pin
–Vout
+Vout
Common
–Vout
4
5
5
Dimensions in [mm], () = Inch
Pin diameter: 1.0 0.05 (0.02 0.002)
Pin pitch tolerances: 0.13 ( 0.005)
Case tolerances: 0.25 ( 0.01)
Insulated baseplate
Heat-Sink (Option)
Heat-sink TEN-HS4 (optional)
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
9 g (0.31oz) without converter
Heat-sink
Thermal pad
Clamp
Material:
Finish:
Weight:
Converter
23.0 (0.91)
Thermal impedance after assembling: 10 K/W
18.0 (0.71)
max.
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. February 21.2014
www.tracopower.com
Page 3 of 3